CDC ACM doesn't working in a custom linux kernel
I've a cubieboard2 running arch linux with a custom linux kernel.
In the cubieboard2 I plugged in my usb-serial device (like an arduino), the device is recognized as CDC ACM. My linux kernel has the CDC options enabled in the configuration, as I saw in this page, but, I can't use the serial port /dev/ttyACM0 using the applications minicom or pyserial.
Minicom just says that it can't open the serial port. Pyserial is able to open the port, but when I try reading it the result is:
SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
Yet in pyserial if I try to write a byte the result is other:
SerialException: write failed: [Errno 5] Input/output error.
Other weird things happen when I close the serial port, it changes its name, in other words, when I close the /dev/ttyACM0 it changes to /dev/ttyACM1.
I've tried my device in my laptop and it works fine with both, pyserial and minicom.
cubieboard2 info:
$ uname -a
Linux alarm 3.4.61-rt77-ARCH+ #10 SMP PREEMPT RT Thu Apr 17 13:58:20 BRT 2014 armv7l GNU/Linux
my kernel config file: http://pastebin.com/raw.php?i=6LfsRyek
My guess is that it's missing having some kernel option enabled, but I don't know which.
Any idea?
linux-kernel usb cubieboard
edited Apr 18 '14 at 3:16
slm♦
250k66524683
asked Apr 17 '14 at 20:25
Ricardo CrudoRicardo Crudo
1315
bumped to the homepage by Community♦ 23 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |
I've a cubieboard2 running arch linux with a custom linux kernel.
In the cubieboard2 I plugged in my usb-serial device (like an arduino), the device is recognized as CDC ACM. My linux kernel has the CDC options enabled in the configuration, as I saw in this page, but, I can't use the serial port /dev/ttyACM0 using the applications minicom or pyserial.
Minicom just says that it can't open the serial port. Pyserial is able to open the port, but when I try reading it the result is:
SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
Yet in pyserial if I try to write a byte the result is other:
SerialException: write failed: [Errno 5] Input/output error.
Other weird things happen when I close the serial port, it changes its name, in other words, when I close the /dev/ttyACM0 it changes to /dev/ttyACM1.
I've tried my device in my laptop and it works fine with both, pyserial and minicom.
cubieboard2 info:
$ uname -a
Linux alarm 3.4.61-rt77-ARCH+ #10 SMP PREEMPT RT Thu Apr 17 13:58:20 BRT 2014 armv7l GNU/Linux
my kernel config file: http://pastebin.com/raw.php?i=6LfsRyek
My guess is that it's missing having some kernel option enabled, but I don't know which.
Any idea?
linux-kernel usb cubieboard
edited Apr 18 '14 at 3:16
slm♦
250k66524683
asked Apr 17 '14 at 20:25
Ricardo CrudoRicardo Crudo
1315
bumped to the homepage by Community♦ 23 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |
I've a cubieboard2 running arch linux with a custom linux kernel.
In the cubieboard2 I plugged in my usb-serial device (like an arduino), the device is recognized as CDC ACM. My linux kernel has the CDC options enabled in the configuration, as I saw in this page, but, I can't use the serial port /dev/ttyACM0 using the applications minicom or pyserial.
Minicom just says that it can't open the serial port. Pyserial is able to open the port, but when I try reading it the result is:
SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
Yet in pyserial if I try to write a byte the result is other:
SerialException: write failed: [Errno 5] Input/output error.
Other weird things happen when I close the serial port, it changes its name, in other words, when I close the /dev/ttyACM0 it changes to /dev/ttyACM1.
I've tried my device in my laptop and it works fine with both, pyserial and minicom.
cubieboard2 info:
$ uname -a
Linux alarm 3.4.61-rt77-ARCH+ #10 SMP PREEMPT RT Thu Apr 17 13:58:20 BRT 2014 armv7l GNU/Linux
my kernel config file: http://pastebin.com/raw.php?i=6LfsRyek
My guess is that it's missing having some kernel option enabled, but I don't know which.
Any idea?
linux-kernel usb cubieboard
edited Apr 18 '14 at 3:16
slm♦
250k66524683
asked Apr 17 '14 at 20:25
Ricardo CrudoRicardo Crudo
1315
I've a cubieboard2 running arch linux with a custom linux kernel.
In the cubieboard2 I plugged in my usb-serial device (like an arduino), the device is recognized as CDC ACM. My linux kernel has the CDC options enabled in the configuration, as I saw in this page, but, I can't use the serial port /dev/ttyACM0 using the applications minicom or pyserial.
Minicom just says that it can't open the serial port. Pyserial is able to open the port, but when I try reading it the result is:
SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
Yet in pyserial if I try to write a byte the result is other:
SerialException: write failed: [Errno 5] Input/output error.
Other weird things happen when I close the serial port, it changes its name, in other words, when I close the /dev/ttyACM0 it changes to /dev/ttyACM1.
I've tried my device in my laptop and it works fine with both, pyserial and minicom.
cubieboard2 info:
$ uname -a
Linux alarm 3.4.61-rt77-ARCH+ #10 SMP PREEMPT RT Thu Apr 17 13:58:20 BRT 2014 armv7l GNU/Linux
my kernel config file: http://pastebin.com/raw.php?i=6LfsRyek
My guess is that it's missing having some kernel option enabled, but I don't know which.
Any idea?
linux-kernel usb cubieboard
linux-kernel usb cubieboard
edited Apr 18 '14 at 3:16
slm♦
250k66524683
asked Apr 17 '14 at 20:25
Ricardo CrudoRicardo Crudo
1315
edited Apr 18 '14 at 3:16
slm♦
250k66524683
asked Apr 17 '14 at 20:25
Ricardo CrudoRicardo Crudo
1315
edited Apr 18 '14 at 3:16
slm♦
250k66524683
edited Apr 18 '14 at 3:16
slm♦
250k66524683
edited Apr 18 '14 at 3:16
slm♦
250k66524683
250k66524683
asked Apr 17 '14 at 20:25
Ricardo CrudoRicardo Crudo
1315
asked Apr 17 '14 at 20:25
Ricardo CrudoRicardo Crudo
1315
asked Apr 17 '14 at 20:25
Ricardo CrudoRicardo Crudo
1315
1315
bumped to the homepage by Community♦ 23 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ 23 mins ago
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
It seems to me that the problem is your device. It might enumerate OK, but behaves unexpectedly when further communications are performed. Try using Wireshark with usbmon (eventually tshark if you don't have an X session). The ttyACM1 name is usually due to re-enumeration after a faulty communication.
answered Jul 25 '15 at 12:01
CaerbannogCaerbannog
1
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f125285%2fcdc-acm-doesnt-working-in-a-custom-linux-kernel%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
It seems to me that the problem is your device. It might enumerate OK, but behaves unexpectedly when further communications are performed. Try using Wireshark with usbmon (eventually tshark if you don't have an X session). The ttyACM1 name is usually due to re-enumeration after a faulty communication.
answered Jul 25 '15 at 12:01
CaerbannogCaerbannog
1
add a comment |
It seems to me that the problem is your device. It might enumerate OK, but behaves unexpectedly when further communications are performed. Try using Wireshark with usbmon (eventually tshark if you don't have an X session). The ttyACM1 name is usually due to re-enumeration after a faulty communication.
answered Jul 25 '15 at 12:01
CaerbannogCaerbannog
1
add a comment |
It seems to me that the problem is your device. It might enumerate OK, but behaves unexpectedly when further communications are performed. Try using Wireshark with usbmon (eventually tshark if you don't have an X session). The ttyACM1 name is usually due to re-enumeration after a faulty communication.
answered Jul 25 '15 at 12:01
CaerbannogCaerbannog
1
It seems to me that the problem is your device. It might enumerate OK, but behaves unexpectedly when further communications are performed. Try using Wireshark with usbmon (eventually tshark if you don't have an X session). The ttyACM1 name is usually due to re-enumeration after a faulty communication.
answered Jul 25 '15 at 12:01
CaerbannogCaerbannog
1
answered Jul 25 '15 at 12:01
CaerbannogCaerbannog
1
answered Jul 25 '15 at 12:01
CaerbannogCaerbannog
1
answered Jul 25 '15 at 12:01
CaerbannogCaerbannog
1
1
add a comment |
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f125285%2fcdc-acm-doesnt-working-in-a-custom-linux-kernel%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
