Color changes of orbitals in chemmacros
4
I'm trying to change the colors of these orbitals. So instead of the clear and blue color, I want them to be red and blue only. I tried changing the setup color, but just becomes red and clear or blue and clear. How would I change it?
documentclass{general}
usepackage{chemfig,chemmacros}
chemsetup{modules=all}
begin{document}
setbondoffset{0pt}
chemsetup[orbital]{
overlay ,
opacity = .75 ,
p/scale = 1.6 ,
s/color = blue!50 , %changing to red!50 is no help%
s/scale = 1.6
}
chemfig{
-[:-20]orbital{p}
(-[:-150])-orbital{p}
}
end{document}
chemfig chemmacros
edited 13 mins ago
andselisk
1,0022725
asked 11 hours ago
Dave2343Dave2343
785
add a comment |
4
I'm trying to change the colors of these orbitals. So instead of the clear and blue color, I want them to be red and blue only. I tried changing the setup color, but just becomes red and clear or blue and clear. How would I change it?
documentclass{general}
usepackage{chemfig,chemmacros}
chemsetup{modules=all}
begin{document}
setbondoffset{0pt}
chemsetup[orbital]{
overlay ,
opacity = .75 ,
p/scale = 1.6 ,
s/color = blue!50 , %changing to red!50 is no help%
s/scale = 1.6
}
chemfig{
-[:-20]orbital{p}
(-[:-150])-orbital{p}
}
end{document}
chemfig chemmacros
edited 13 mins ago
andselisk
1,0022725
asked 11 hours ago
Dave2343Dave2343
785
add a comment |
4
4
4
I'm trying to change the colors of these orbitals. So instead of the clear and blue color, I want them to be red and blue only. I tried changing the setup color, but just becomes red and clear or blue and clear. How would I change it?
documentclass{general}
usepackage{chemfig,chemmacros}
chemsetup{modules=all}
begin{document}
setbondoffset{0pt}
chemsetup[orbital]{
overlay ,
opacity = .75 ,
p/scale = 1.6 ,
s/color = blue!50 , %changing to red!50 is no help%
s/scale = 1.6
}
chemfig{
-[:-20]orbital{p}
(-[:-150])-orbital{p}
}
end{document}
chemfig chemmacros
edited 13 mins ago
andselisk
1,0022725
asked 11 hours ago
Dave2343Dave2343
785
I'm trying to change the colors of these orbitals. So instead of the clear and blue color, I want them to be red and blue only. I tried changing the setup color, but just becomes red and clear or blue and clear. How would I change it?
documentclass{general}
usepackage{chemfig,chemmacros}
chemsetup{modules=all}
begin{document}
setbondoffset{0pt}
chemsetup[orbital]{
overlay ,
opacity = .75 ,
p/scale = 1.6 ,
s/color = blue!50 , %changing to red!50 is no help%
s/scale = 1.6
}
chemfig{
-[:-20]orbital{p}
(-[:-150])-orbital{p}
}
end{document}
chemfig chemmacros
chemfig chemmacros
edited 13 mins ago
andselisk
1,0022725
asked 11 hours ago
Dave2343Dave2343
785
edited 13 mins ago
andselisk
1,0022725
asked 11 hours ago
Dave2343Dave2343
785
edited 13 mins ago
andselisk
1,0022725
edited 13 mins ago
andselisk
1,0022725
edited 13 mins ago
andselisk
1,0022725
1,0022725
asked 11 hours ago
Dave2343Dave2343
785
asked 11 hours ago
Dave2343Dave2343
785
asked 11 hours ago
Dave2343Dave2343
785
785
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
2
It would appear the package default is black and white and the only available option is to change the upper black half to another color tone as you have done to blue.
However we can workaround and trick the package to produce this
without resorting to redefining any package definitions (I do agree its a kludge)
documentclass[a5paper]{report}
% documentclass{general} % I do not have a general.sty
usepackage{chemfig,chemmacros}
chemsetup{modules=all}
begin{document}
setbondoffset{0pt}
chemsetup[orbital]{
overlay ,
opacity = .75 ,
p/color = blue!50 , %setting black to another color%
p/scale = 1.6
}
chemfig{
-[:-20]{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} % and over-strike white half with red half @75%
}
hspace{12mm}
{ chemfig{
-[:-20]{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} % and over-strike white half with red half @75%
}
hspace{12mm}
{ chemfig{
-[:-20]{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} % and over-strike white half with red half @75%
}
end{document}
answered 7 hours ago
KJOKJO
2,7241119
Thank you for the answer, it was really helpful! How would I do it for the sp2 orbital command? Would it be the same process? @KJO
– Dave2343
6 hours ago
I would say "roughly" yes since that is the way the package appears to be constructed (I did not look into wrestling with the code, just at how to simply work within its limitations) I suspect scaling will be the bigger part of adjusting for sp2 but once you have the relative scales correct once it is then simply a bigger volume of cut and paste. Thinking about it for sp2 it would be easier to just have the 2 scaled coloured halves of P and not use sp2 at all
– KJO
5 hours ago
Oh ok. Then I'll try that out. Thanks!
– Dave2343
5 hours ago
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f477767%2fcolor-changes-of-orbitals-in-chemmacros%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
2
It would appear the package default is black and white and the only available option is to change the upper black half to another color tone as you have done to blue.
However we can workaround and trick the package to produce this
without resorting to redefining any package definitions (I do agree its a kludge)
documentclass[a5paper]{report}
% documentclass{general} % I do not have a general.sty
usepackage{chemfig,chemmacros}
chemsetup{modules=all}
begin{document}
setbondoffset{0pt}
chemsetup[orbital]{
overlay ,
opacity = .75 ,
p/color = blue!50 , %setting black to another color%
p/scale = 1.6
}
chemfig{
-[:-20]{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} % and over-strike white half with red half @75%
}
hspace{12mm}
{ chemfig{
-[:-20]{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} % and over-strike white half with red half @75%
}
hspace{12mm}
{ chemfig{
-[:-20]{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} % and over-strike white half with red half @75%
}
end{document}
answered 7 hours ago
KJOKJO
2,7241119
Thank you for the answer, it was really helpful! How would I do it for the sp2 orbital command? Would it be the same process? @KJO
– Dave2343
6 hours ago
I would say "roughly" yes since that is the way the package appears to be constructed (I did not look into wrestling with the code, just at how to simply work within its limitations) I suspect scaling will be the bigger part of adjusting for sp2 but once you have the relative scales correct once it is then simply a bigger volume of cut and paste. Thinking about it for sp2 it would be easier to just have the 2 scaled coloured halves of P and not use sp2 at all
– KJO
5 hours ago
Oh ok. Then I'll try that out. Thanks!
– Dave2343
5 hours ago
add a comment |
2
It would appear the package default is black and white and the only available option is to change the upper black half to another color tone as you have done to blue.
However we can workaround and trick the package to produce this
without resorting to redefining any package definitions (I do agree its a kludge)
documentclass[a5paper]{report}
% documentclass{general} % I do not have a general.sty
usepackage{chemfig,chemmacros}
chemsetup{modules=all}
begin{document}
setbondoffset{0pt}
chemsetup[orbital]{
overlay ,
opacity = .75 ,
p/color = blue!50 , %setting black to another color%
p/scale = 1.6
}
chemfig{
-[:-20]{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} % and over-strike white half with red half @75%
}
hspace{12mm}
{ chemfig{
-[:-20]{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} % and over-strike white half with red half @75%
}
hspace{12mm}
{ chemfig{
-[:-20]{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} % and over-strike white half with red half @75%
}
end{document}
answered 7 hours ago
KJOKJO
2,7241119
Thank you for the answer, it was really helpful! How would I do it for the sp2 orbital command? Would it be the same process? @KJO
– Dave2343
6 hours ago
I would say "roughly" yes since that is the way the package appears to be constructed (I did not look into wrestling with the code, just at how to simply work within its limitations) I suspect scaling will be the bigger part of adjusting for sp2 but once you have the relative scales correct once it is then simply a bigger volume of cut and paste. Thinking about it for sp2 it would be easier to just have the 2 scaled coloured halves of P and not use sp2 at all
– KJO
5 hours ago
Oh ok. Then I'll try that out. Thanks!
– Dave2343
5 hours ago
add a comment |
2
2
2
It would appear the package default is black and white and the only available option is to change the upper black half to another color tone as you have done to blue.
However we can workaround and trick the package to produce this
without resorting to redefining any package definitions (I do agree its a kludge)
documentclass[a5paper]{report}
% documentclass{general} % I do not have a general.sty
usepackage{chemfig,chemmacros}
chemsetup{modules=all}
begin{document}
setbondoffset{0pt}
chemsetup[orbital]{
overlay ,
opacity = .75 ,
p/color = blue!50 , %setting black to another color%
p/scale = 1.6
}
chemfig{
-[:-20]{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} % and over-strike white half with red half @75%
}
hspace{12mm}
{ chemfig{
-[:-20]{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} % and over-strike white half with red half @75%
}
hspace{12mm}
{ chemfig{
-[:-20]{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} % and over-strike white half with red half @75%
}
end{document}
answered 7 hours ago
KJOKJO
2,7241119
It would appear the package default is black and white and the only available option is to change the upper black half to another color tone as you have done to blue.
However we can workaround and trick the package to produce this
without resorting to redefining any package definitions (I do agree its a kludge)
documentclass[a5paper]{report}
% documentclass{general} % I do not have a general.sty
usepackage{chemfig,chemmacros}
chemsetup{modules=all}
begin{document}
setbondoffset{0pt}
chemsetup[orbital]{
overlay ,
opacity = .75 ,
p/color = blue!50 , %setting black to another color%
p/scale = 1.6
}
chemfig{
-[:-20]{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} % and over-strike white half with red half @75%
}
hspace{12mm}
{ chemfig{
-[:-20]{orbital[phase=-]{p}}{orbital[half,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} % and over-strike white half with red half @75%
}
hspace{12mm}
{ chemfig{
-[:-20]{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} %Note a half does not work well inverted so invert p
(-[:-150])-{orbital{p}}{orbital[half,angle=270,color=red!75]{p}} % and over-strike white half with red half @75%
}
end{document}
answered 7 hours ago
KJOKJO
2,7241119
edited 7 hours ago
answered 7 hours ago
KJOKJO
2,7241119
answered 7 hours ago
KJOKJO
2,7241119
answered 7 hours ago
KJOKJO
2,7241119
2,7241119
Thank you for the answer, it was really helpful! How would I do it for the sp2 orbital command? Would it be the same process? @KJO
– Dave2343
6 hours ago
I would say "roughly" yes since that is the way the package appears to be constructed (I did not look into wrestling with the code, just at how to simply work within its limitations) I suspect scaling will be the bigger part of adjusting for sp2 but once you have the relative scales correct once it is then simply a bigger volume of cut and paste. Thinking about it for sp2 it would be easier to just have the 2 scaled coloured halves of P and not use sp2 at all
– KJO
5 hours ago
Oh ok. Then I'll try that out. Thanks!
– Dave2343
5 hours ago
add a comment |
Thank you for the answer, it was really helpful! How would I do it for the sp2 orbital command? Would it be the same process? @KJO
– Dave2343
6 hours ago
I would say "roughly" yes since that is the way the package appears to be constructed (I did not look into wrestling with the code, just at how to simply work within its limitations) I suspect scaling will be the bigger part of adjusting for sp2 but once you have the relative scales correct once it is then simply a bigger volume of cut and paste. Thinking about it for sp2 it would be easier to just have the 2 scaled coloured halves of P and not use sp2 at all
– KJO
5 hours ago
Oh ok. Then I'll try that out. Thanks!
– Dave2343
5 hours ago
Thank you for the answer, it was really helpful! How would I do it for the sp2 orbital command? Would it be the same process? @KJO
– Dave2343
6 hours ago
Thank you for the answer, it was really helpful! How would I do it for the sp2 orbital command? Would it be the same process? @KJO
– Dave2343
6 hours ago
I would say "roughly" yes since that is the way the package appears to be constructed (I did not look into wrestling with the code, just at how to simply work within its limitations) I suspect scaling will be the bigger part of adjusting for sp2 but once you have the relative scales correct once it is then simply a bigger volume of cut and paste. Thinking about it for sp2 it would be easier to just have the 2 scaled coloured halves of P and not use sp2 at all
– KJO
5 hours ago
I would say "roughly" yes since that is the way the package appears to be constructed (I did not look into wrestling with the code, just at how to simply work within its limitations) I suspect scaling will be the bigger part of adjusting for sp2 but once you have the relative scales correct once it is then simply a bigger volume of cut and paste. Thinking about it for sp2 it would be easier to just have the 2 scaled coloured halves of P and not use sp2 at all
– KJO
5 hours ago
Oh ok. Then I'll try that out. Thanks!
– Dave2343
5 hours ago
Oh ok. Then I'll try that out. Thanks!
– Dave2343
5 hours ago
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f477767%2fcolor-changes-of-orbitals-in-chemmacros%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
