距離計

Multi tool use
距離計(きょりけい)とは非接触で二点間の距離を測る計測機器である。光学式、超音波式、レーザー光線式などがあり用途によって使い分けられている。
詳細は「レンジファインダー」を参照
- 望遠レンズのピントをコントラストなどで検知するもの
コントラスト方式は2地点の差を測るため、三角測量の応用と考えられる。光学系に望遠レンズを使えば有効基線長が長くなり高精度を実現できるが、そうでなければレンジファインダーの方が高精度となる。
- 対象に向けて超音波を照射し反射して返って来るまでの時間を測る。数メートル程度の距離計の場合、利用される超音波は40キロヘルツ~200キロヘルツ程度である。
- 暗くても検知可能だが、ガラス越しでは使えない。ポラロイドのオートフォーカスカメラSX-70が超音波方式である。
詳細は「光波測距儀」を参照
- 対象に向けてレーザー光線を照射し反射して返って来るまでの時間を測る。対象物が生物の場合に危険が伴うため、カメラには使えない。主に戦車などの射撃統制装置に使用される。
- 近年は個人でも気軽に購入できる安価なレーザー採用製品がホームセンターや工具店で販売されるようになってきている。
- 陸軍では各砲台、堡塁、野戦軍が携帯使用した。日本陸軍では1883年に野戦用としてゴーティエ距離計を、1887年に海岸高砲台のためにオドゥアール距離計を採用した。以来低砲台のために水平基線距離計を探していた。たまたまイタリアでブラッチャリーニ距離計の性能が日本側の要求に合致するのでブラッチャリーニを招きその構造、用法、学理などを聴取、研究し1897年頃、その垂直基線距離計を採用した。しかしこれに満足することなくドイツから「芭斯式」水平基線距離計を購入、試験し1907年に採用し要塞用距離計はひととおり揃った。音響距離計は日露戦争で実戦に使用し、成績良好であったとして1914年12月に制式として重砲観測具に採用した。これは形態は懐中時計と同様で外方に20.4kmの分画を100mごとに刻み、内方に60秒を刻む。その使用法は敵砲の発射の火花を目撃して竜頭を押下し指針が発動し、射撃の音響を聞いたらただちに竜頭を押下し指針が停止する。指針が指す分画は敵砲までの距離である。分画を看読したのちはさらに竜頭を押下し、指針は0位に復帰する。示される距離は気温摂氏15度すなわち音速340m/secに応じたものであり、精密正確に測定するならば、気温に従って
- V = 330.9+0.626(±T)。ただしTは摂氏の気温、0度以下では-、以上は+
- D = NV。ただしDは距離(m)、Nは音響の経過時間(sec)
- の式によって改算しなければならない。
 |
この項目は、工学・技術に関連した書きかけの項目です。この項目を加筆・訂正などしてくださる協力者を求めています(Portal:技術と産業)。 |
f,iQ6pfK41OfM f
Popular posts from this blog
4
Backstory: I have a Huawei HG8245 router in my house and I want to change the default username/password. I've tried following this guide but the config file always gets reset. My ISP isn't helping either so I'm looking for other ways to accomplish this. The router has telnet access so this seems like a way to change the credentials. The first shell I gain access to looks like this: WAP> Pressing "?" gives me a list of available commands which I've pasted here, the two interesting ones are "su" and "shell". I can't seem to get su access, even after logging in as root (challenge password prompt, and then nothing happens), but shell gives me a proper linux shell. WAP>shell BusyBox v1.18.4 (2017-12-26 17:06:34 CST) built-in shell (ash) Enter 'hel...
up vote
3
down vote
favorite
I have bluez 5.4.3 and I am attempting to communicate with a ble device through minicom. These two deceives (my computer and a bluno nano) are alreadt paired and this has been my method so far. #bluetoothctl # pair xx:xx:xx:xx:xx:xx # exit Everything is working well so far then... #sudo rfcomm connect /dev/rfcomm0 xx:xx:xx:xx:xx:xx 1 & [1] 3665 Can't connect RFCOMM socket: Host is down Does anyone know how to resolve this issue? Any help would be very much appreciated.
bluetooth bluez
share | improve this question
asked Feb 9 '17 at 18:46
Brandon Knape
46 2 ...
0
Every day this error occured on my pc, kernel panic error on interrupt, what will be the problem?
linux-mint
share
asked 6 mins ago
Vinod Selvin Vinod Selvin
1 1
New contributor
Vinod Selvin is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment ...