USB 3.1 hub shown as USB 2.0
My problem is the following. My system is detecting my USB 3.1 Gen1 hub (onboard hub).
First, I confirmed that my motherboard does indeed have support for USB 3.1. I have an Asus H97-PRO which has obviously the H97 chipset which does have support for USB 3.1 Gen1. You can find listed in the Asus the following 6 x USB 3.1 Gen 1 port(s) (4 at back panel, blue, 2 at mid-board). So, my board does have support for USB 3.1 Gen1`.
If I do lsusb, I get two USB 2.0 hubs. I have one USB 2.0 hub and one USB 3.1 Gen1 hub.
Bus 002 Device 004: ID 04d9:a070 Holtek Semiconductor, Inc.
Bus 002 Device 002: ID 8087:8001 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
If I do lsusb -t. I get the two hubs with a speed of 480M as expected.
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
|__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 4, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
Using one of my development boards, which has USB 3.0, I can confirm that when connected to a USB 3.1 port, it is forced to run on USB 2.0.
I have already ran update-usbids, update-pciids and added iommu=soft to GRUB_CMDLINE_LINUX_DEFAULT in the grub configuration.
I've ran out of ideas. Thanks in advance for everyone who tries to help.
drivers usb hardware usb-device hardware-compatibility
asked Oct 20 '17 at 19:34
FFY00FFY00
265
add a comment |
My problem is the following. My system is detecting my USB 3.1 Gen1 hub (onboard hub).
First, I confirmed that my motherboard does indeed have support for USB 3.1. I have an Asus H97-PRO which has obviously the H97 chipset which does have support for USB 3.1 Gen1. You can find listed in the Asus the following 6 x USB 3.1 Gen 1 port(s) (4 at back panel, blue, 2 at mid-board). So, my board does have support for USB 3.1 Gen1`.
If I do lsusb, I get two USB 2.0 hubs. I have one USB 2.0 hub and one USB 3.1 Gen1 hub.
Bus 002 Device 004: ID 04d9:a070 Holtek Semiconductor, Inc.
Bus 002 Device 002: ID 8087:8001 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
If I do lsusb -t. I get the two hubs with a speed of 480M as expected.
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
|__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 4, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
Using one of my development boards, which has USB 3.0, I can confirm that when connected to a USB 3.1 port, it is forced to run on USB 2.0.
I have already ran update-usbids, update-pciids and added iommu=soft to GRUB_CMDLINE_LINUX_DEFAULT in the grub configuration.
I've ran out of ideas. Thanks in advance for everyone who tries to help.
drivers usb hardware usb-device hardware-compatibility
asked Oct 20 '17 at 19:34
FFY00FFY00
265
1
Before anyone else asks, thelsusb -toutput does indeed confirm that the kernel only sees USB 2 ports: USB 3 ports would appear asClass=root_hub, Driver=xhci_hcd/6p, 5000M(with a varying number of ports of course, the important part here is “5000M”).
– Stephen Kitt
Oct 20 '17 at 19:37
I just answered the question. For some reason the motherboard didn't came withXHCIenabled by default which I took for granted. Guess we can't trust in the manufacturers.
– FFY00
Oct 20 '17 at 19:44
add a comment |
My problem is the following. My system is detecting my USB 3.1 Gen1 hub (onboard hub).
First, I confirmed that my motherboard does indeed have support for USB 3.1. I have an Asus H97-PRO which has obviously the H97 chipset which does have support for USB 3.1 Gen1. You can find listed in the Asus the following 6 x USB 3.1 Gen 1 port(s) (4 at back panel, blue, 2 at mid-board). So, my board does have support for USB 3.1 Gen1`.
If I do lsusb, I get two USB 2.0 hubs. I have one USB 2.0 hub and one USB 3.1 Gen1 hub.
Bus 002 Device 004: ID 04d9:a070 Holtek Semiconductor, Inc.
Bus 002 Device 002: ID 8087:8001 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
If I do lsusb -t. I get the two hubs with a speed of 480M as expected.
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
|__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 4, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
Using one of my development boards, which has USB 3.0, I can confirm that when connected to a USB 3.1 port, it is forced to run on USB 2.0.
I have already ran update-usbids, update-pciids and added iommu=soft to GRUB_CMDLINE_LINUX_DEFAULT in the grub configuration.
I've ran out of ideas. Thanks in advance for everyone who tries to help.
drivers usb hardware usb-device hardware-compatibility
asked Oct 20 '17 at 19:34
FFY00FFY00
265
My problem is the following. My system is detecting my USB 3.1 Gen1 hub (onboard hub).
First, I confirmed that my motherboard does indeed have support for USB 3.1. I have an Asus H97-PRO which has obviously the H97 chipset which does have support for USB 3.1 Gen1. You can find listed in the Asus the following 6 x USB 3.1 Gen 1 port(s) (4 at back panel, blue, 2 at mid-board). So, my board does have support for USB 3.1 Gen1`.
If I do lsusb, I get two USB 2.0 hubs. I have one USB 2.0 hub and one USB 3.1 Gen1 hub.
Bus 002 Device 004: ID 04d9:a070 Holtek Semiconductor, Inc.
Bus 002 Device 002: ID 8087:8001 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
If I do lsusb -t. I get the two hubs with a speed of 480M as expected.
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
|__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 4, If 2, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
Using one of my development boards, which has USB 3.0, I can confirm that when connected to a USB 3.1 port, it is forced to run on USB 2.0.
I have already ran update-usbids, update-pciids and added iommu=soft to GRUB_CMDLINE_LINUX_DEFAULT in the grub configuration.
I've ran out of ideas. Thanks in advance for everyone who tries to help.
drivers usb hardware usb-device hardware-compatibility
drivers usb hardware usb-device hardware-compatibility
asked Oct 20 '17 at 19:34
FFY00FFY00
265
asked Oct 20 '17 at 19:34
FFY00FFY00
265
asked Oct 20 '17 at 19:34
FFY00FFY00
265
asked Oct 20 '17 at 19:34
FFY00FFY00
265
asked Oct 20 '17 at 19:34
FFY00FFY00
265
265
1
Before anyone else asks, thelsusb -toutput does indeed confirm that the kernel only sees USB 2 ports: USB 3 ports would appear asClass=root_hub, Driver=xhci_hcd/6p, 5000M(with a varying number of ports of course, the important part here is “5000M”).
– Stephen Kitt
Oct 20 '17 at 19:37
I just answered the question. For some reason the motherboard didn't came withXHCIenabled by default which I took for granted. Guess we can't trust in the manufacturers.
– FFY00
Oct 20 '17 at 19:44
add a comment |
1
Before anyone else asks, thelsusb -toutput does indeed confirm that the kernel only sees USB 2 ports: USB 3 ports would appear asClass=root_hub, Driver=xhci_hcd/6p, 5000M(with a varying number of ports of course, the important part here is “5000M”).
– Stephen Kitt
Oct 20 '17 at 19:37
I just answered the question. For some reason the motherboard didn't came withXHCIenabled by default which I took for granted. Guess we can't trust in the manufacturers.
– FFY00
Oct 20 '17 at 19:44
1
1
Before anyone else asks, the
lsusb -t output does indeed confirm that the kernel only sees USB 2 ports: USB 3 ports would appear as Class=root_hub, Driver=xhci_hcd/6p, 5000M (with a varying number of ports of course, the important part here is “5000M”).– Stephen Kitt
Oct 20 '17 at 19:37
Before anyone else asks, the
lsusb -t output does indeed confirm that the kernel only sees USB 2 ports: USB 3 ports would appear as Class=root_hub, Driver=xhci_hcd/6p, 5000M (with a varying number of ports of course, the important part here is “5000M”).– Stephen Kitt
Oct 20 '17 at 19:37
I just answered the question. For some reason the motherboard didn't came with
XHCI enabled by default which I took for granted. Guess we can't trust in the manufacturers.– FFY00
Oct 20 '17 at 19:44
I just answered the question. For some reason the motherboard didn't came with
XHCI enabled by default which I took for granted. Guess we can't trust in the manufacturers.– FFY00
Oct 20 '17 at 19:44
add a comment |
2 Answers
2
active
oldest
votes
Okay, for some reason my motherboard doesn't come with the XHCI support enabled by default. So if anyone is experiencing a similar issue just go and check if XHCI is enabled in the bios.
answered Oct 20 '17 at 19:42
FFY00FFY00
265
add a comment |
Setting the xHCI to disabled allows the dual boot to function correctly.
On dual-Boot between Window 10 and Linux Ubuntu 18.04 , the xHCI Controller bypasses the legacy usb ports (loads no legacy usb ports).
As a result usb 3 port act as usb 2 port.
answered 18 mins ago
Prakash KarkeePrakash Karkee
1
New contributor
Prakash Karkee is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f399421%2fusb-3-1-hub-shown-as-usb-2-0%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Okay, for some reason my motherboard doesn't come with the XHCI support enabled by default. So if anyone is experiencing a similar issue just go and check if XHCI is enabled in the bios.
answered Oct 20 '17 at 19:42
FFY00FFY00
265
add a comment |
Okay, for some reason my motherboard doesn't come with the XHCI support enabled by default. So if anyone is experiencing a similar issue just go and check if XHCI is enabled in the bios.
answered Oct 20 '17 at 19:42
FFY00FFY00
265
add a comment |
Okay, for some reason my motherboard doesn't come with the XHCI support enabled by default. So if anyone is experiencing a similar issue just go and check if XHCI is enabled in the bios.
answered Oct 20 '17 at 19:42
FFY00FFY00
265
Okay, for some reason my motherboard doesn't come with the XHCI support enabled by default. So if anyone is experiencing a similar issue just go and check if XHCI is enabled in the bios.
answered Oct 20 '17 at 19:42
FFY00FFY00
265
edited Oct 22 '17 at 18:34
answered Oct 20 '17 at 19:42
FFY00FFY00
265
answered Oct 20 '17 at 19:42
FFY00FFY00
265
answered Oct 20 '17 at 19:42
FFY00FFY00
265
265
add a comment |
add a comment |
Setting the xHCI to disabled allows the dual boot to function correctly.
On dual-Boot between Window 10 and Linux Ubuntu 18.04 , the xHCI Controller bypasses the legacy usb ports (loads no legacy usb ports).
As a result usb 3 port act as usb 2 port.
answered 18 mins ago
Prakash KarkeePrakash Karkee
1
New contributor
Prakash Karkee is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Setting the xHCI to disabled allows the dual boot to function correctly.
On dual-Boot between Window 10 and Linux Ubuntu 18.04 , the xHCI Controller bypasses the legacy usb ports (loads no legacy usb ports).
As a result usb 3 port act as usb 2 port.
answered 18 mins ago
Prakash KarkeePrakash Karkee
1
New contributor
Prakash Karkee is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Setting the xHCI to disabled allows the dual boot to function correctly.
On dual-Boot between Window 10 and Linux Ubuntu 18.04 , the xHCI Controller bypasses the legacy usb ports (loads no legacy usb ports).
As a result usb 3 port act as usb 2 port.
answered 18 mins ago
Prakash KarkeePrakash Karkee
1
New contributor
Prakash Karkee is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Setting the xHCI to disabled allows the dual boot to function correctly.
On dual-Boot between Window 10 and Linux Ubuntu 18.04 , the xHCI Controller bypasses the legacy usb ports (loads no legacy usb ports).
As a result usb 3 port act as usb 2 port.
answered 18 mins ago
Prakash KarkeePrakash Karkee
1
New contributor
Prakash Karkee is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 18 mins ago
Prakash KarkeePrakash Karkee
1
New contributor
Prakash Karkee is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 18 mins ago
Prakash KarkeePrakash Karkee
1
answered 18 mins ago
Prakash KarkeePrakash Karkee
1
1
New contributor
Prakash Karkee is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Prakash Karkee is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Prakash Karkee is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f399421%2fusb-3-1-hub-shown-as-usb-2-0%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
Before anyone else asks, the
lsusb -toutput does indeed confirm that the kernel only sees USB 2 ports: USB 3 ports would appear asClass=root_hub, Driver=xhci_hcd/6p, 5000M(with a varying number of ports of course, the important part here is “5000M”).– Stephen Kitt
Oct 20 '17 at 19:37
I just answered the question. For some reason the motherboard didn't came with
XHCIenabled by default which I took for granted. Guess we can't trust in the manufacturers.– FFY00
Oct 20 '17 at 19:44