Driver installation NVIDIA GeForce 940-mx not possible
up vote
4
down vote
favorite
This is a really specific question, I have come here before because of it but now I really think I am out of options and trying to see if anyone has experience with this specific video card.
Have tried to install the drivers for it 4 times in the past and nothing has worked. First time with the .run
available in their webpage, nothing happened because an error appeared.
Then tried using nvidia-detect
but it didn't detect anything. So I added the non-free path to download nvidia-driver
, nvidia-smi
and nvidia-xconfig
packages. The first time I ran them only having installed bumblebee
but not bumblebee-nvidia
so system wasn't bootable after restarting, had to purge everything of nvidia's and restore /etc/X11/xorg.conf
to blank (original state), filed a bug report as someone in here recommended and they told me I needed bumblebee-nvidia
for it to work. Downloaded bumblebee-nvidia
, downloaded all those packages again and the system wouldn't boot after restarting, again.
Then tried again with the package from NVIDIA's webpage, this time without a graphics interface since it required that, and system crashed again.
**For all those 3 times that the system crashed I had to purge everything nvidia related and restore to blank the xorg.conf
file and then type startx
to have graphical interface again.
Next I tried what Debian's official page says, basically get things from backports, followed the steps to the line and it wouldn't boot again after restarting, purged everything I installed and everything nvidia related and it wouldn't boot having used the same fix I had done the previous times. A kind heart told me I had to reinstall nouveau
for it work again, and it did after doing that.
Can you please help me on how I could install this specific video card's driver? I have tried everything I have found online and I don't know enough to make up solutions as I go. I can't change the brightness of the screen, can't connect extra monitors, can't use redshift (my eyes are sensitive) and can't even invert colors because of the lack of the driver.
Previously asked question here on the site
Bug Report with more information
Using Debian 8 with Gnome 3, my computer has two video cards an intel (integrated) and the NVIDIA card. Please tell me if more information is required.
Edit: to put the results of the comment
$ sudo apt-get install bbswitch-dkms intel-microcode firmware-linux-nonfree bumblebee bumblebee-nvidia primus primus-libs primus-libs:i386 linux-headers-$(uname -r) nvidia-driver
Reading package lists... Done
Building dependency tree
Reading state information... Done
bbswitch-dkms is already the newest version.
bbswitch-dkms set to manually installed.
primus is already the newest version.
primus-libs is already the newest version.
primus-libs set to manually installed.
bumblebee is already the newest version.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
bumblebee-nvidia : Depends: bumblebee (= 3.2.1-7) but 3.2.1-13~bpo8+1 is to be installed
E: Unable to correct problems, you have held broken packages.
Then did sudo apt-get -f install
just in case and it didn't remove or install anything.
debian drivers nvidia video proprietary-drivers
add a comment |
up vote
4
down vote
favorite
This is a really specific question, I have come here before because of it but now I really think I am out of options and trying to see if anyone has experience with this specific video card.
Have tried to install the drivers for it 4 times in the past and nothing has worked. First time with the .run
available in their webpage, nothing happened because an error appeared.
Then tried using nvidia-detect
but it didn't detect anything. So I added the non-free path to download nvidia-driver
, nvidia-smi
and nvidia-xconfig
packages. The first time I ran them only having installed bumblebee
but not bumblebee-nvidia
so system wasn't bootable after restarting, had to purge everything of nvidia's and restore /etc/X11/xorg.conf
to blank (original state), filed a bug report as someone in here recommended and they told me I needed bumblebee-nvidia
for it to work. Downloaded bumblebee-nvidia
, downloaded all those packages again and the system wouldn't boot after restarting, again.
Then tried again with the package from NVIDIA's webpage, this time without a graphics interface since it required that, and system crashed again.
**For all those 3 times that the system crashed I had to purge everything nvidia related and restore to blank the xorg.conf
file and then type startx
to have graphical interface again.
Next I tried what Debian's official page says, basically get things from backports, followed the steps to the line and it wouldn't boot again after restarting, purged everything I installed and everything nvidia related and it wouldn't boot having used the same fix I had done the previous times. A kind heart told me I had to reinstall nouveau
for it work again, and it did after doing that.
Can you please help me on how I could install this specific video card's driver? I have tried everything I have found online and I don't know enough to make up solutions as I go. I can't change the brightness of the screen, can't connect extra monitors, can't use redshift (my eyes are sensitive) and can't even invert colors because of the lack of the driver.
Previously asked question here on the site
Bug Report with more information
Using Debian 8 with Gnome 3, my computer has two video cards an intel (integrated) and the NVIDIA card. Please tell me if more information is required.
Edit: to put the results of the comment
$ sudo apt-get install bbswitch-dkms intel-microcode firmware-linux-nonfree bumblebee bumblebee-nvidia primus primus-libs primus-libs:i386 linux-headers-$(uname -r) nvidia-driver
Reading package lists... Done
Building dependency tree
Reading state information... Done
bbswitch-dkms is already the newest version.
bbswitch-dkms set to manually installed.
primus is already the newest version.
primus-libs is already the newest version.
primus-libs set to manually installed.
bumblebee is already the newest version.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
bumblebee-nvidia : Depends: bumblebee (= 3.2.1-7) but 3.2.1-13~bpo8+1 is to be installed
E: Unable to correct problems, you have held broken packages.
Then did sudo apt-get -f install
just in case and it didn't remove or install anything.
debian drivers nvidia video proprietary-drivers
Tryapt-get -t jessie-backports install bumblebee-nvidia
– Shadur
Feb 2 '17 at 15:41
To bypass the error from the output? And then install again the package with the problem and do the rest of the instructions the person below said?
– M.O.
Feb 2 '17 at 15:43
1
That should fix the output error - you're trying to install regular bumblebee-nvidia but at some point you installed the backports version of its parent, so there's a dependency mismatch apt is choking on.
– Shadur
Feb 2 '17 at 15:44
@Shadurapt-get -t jessie-backports install bumblebee-nvidia
gives the following output:The following packages have unmet dependencies: bumblebee-nvidia : Depends: glx-alternative-nvidia (>= 0.6.92) E: Unable to correct problems, you have held broken packages.
. And if I try to install nvidia-driverapt-get
always complains about 340 version is going to be installed and ignores jessie-backports. Could you please advise how to solve this?
– Ingvord
Jun 17 '17 at 5:59
add a comment |
up vote
4
down vote
favorite
up vote
4
down vote
favorite
This is a really specific question, I have come here before because of it but now I really think I am out of options and trying to see if anyone has experience with this specific video card.
Have tried to install the drivers for it 4 times in the past and nothing has worked. First time with the .run
available in their webpage, nothing happened because an error appeared.
Then tried using nvidia-detect
but it didn't detect anything. So I added the non-free path to download nvidia-driver
, nvidia-smi
and nvidia-xconfig
packages. The first time I ran them only having installed bumblebee
but not bumblebee-nvidia
so system wasn't bootable after restarting, had to purge everything of nvidia's and restore /etc/X11/xorg.conf
to blank (original state), filed a bug report as someone in here recommended and they told me I needed bumblebee-nvidia
for it to work. Downloaded bumblebee-nvidia
, downloaded all those packages again and the system wouldn't boot after restarting, again.
Then tried again with the package from NVIDIA's webpage, this time without a graphics interface since it required that, and system crashed again.
**For all those 3 times that the system crashed I had to purge everything nvidia related and restore to blank the xorg.conf
file and then type startx
to have graphical interface again.
Next I tried what Debian's official page says, basically get things from backports, followed the steps to the line and it wouldn't boot again after restarting, purged everything I installed and everything nvidia related and it wouldn't boot having used the same fix I had done the previous times. A kind heart told me I had to reinstall nouveau
for it work again, and it did after doing that.
Can you please help me on how I could install this specific video card's driver? I have tried everything I have found online and I don't know enough to make up solutions as I go. I can't change the brightness of the screen, can't connect extra monitors, can't use redshift (my eyes are sensitive) and can't even invert colors because of the lack of the driver.
Previously asked question here on the site
Bug Report with more information
Using Debian 8 with Gnome 3, my computer has two video cards an intel (integrated) and the NVIDIA card. Please tell me if more information is required.
Edit: to put the results of the comment
$ sudo apt-get install bbswitch-dkms intel-microcode firmware-linux-nonfree bumblebee bumblebee-nvidia primus primus-libs primus-libs:i386 linux-headers-$(uname -r) nvidia-driver
Reading package lists... Done
Building dependency tree
Reading state information... Done
bbswitch-dkms is already the newest version.
bbswitch-dkms set to manually installed.
primus is already the newest version.
primus-libs is already the newest version.
primus-libs set to manually installed.
bumblebee is already the newest version.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
bumblebee-nvidia : Depends: bumblebee (= 3.2.1-7) but 3.2.1-13~bpo8+1 is to be installed
E: Unable to correct problems, you have held broken packages.
Then did sudo apt-get -f install
just in case and it didn't remove or install anything.
debian drivers nvidia video proprietary-drivers
This is a really specific question, I have come here before because of it but now I really think I am out of options and trying to see if anyone has experience with this specific video card.
Have tried to install the drivers for it 4 times in the past and nothing has worked. First time with the .run
available in their webpage, nothing happened because an error appeared.
Then tried using nvidia-detect
but it didn't detect anything. So I added the non-free path to download nvidia-driver
, nvidia-smi
and nvidia-xconfig
packages. The first time I ran them only having installed bumblebee
but not bumblebee-nvidia
so system wasn't bootable after restarting, had to purge everything of nvidia's and restore /etc/X11/xorg.conf
to blank (original state), filed a bug report as someone in here recommended and they told me I needed bumblebee-nvidia
for it to work. Downloaded bumblebee-nvidia
, downloaded all those packages again and the system wouldn't boot after restarting, again.
Then tried again with the package from NVIDIA's webpage, this time without a graphics interface since it required that, and system crashed again.
**For all those 3 times that the system crashed I had to purge everything nvidia related and restore to blank the xorg.conf
file and then type startx
to have graphical interface again.
Next I tried what Debian's official page says, basically get things from backports, followed the steps to the line and it wouldn't boot again after restarting, purged everything I installed and everything nvidia related and it wouldn't boot having used the same fix I had done the previous times. A kind heart told me I had to reinstall nouveau
for it work again, and it did after doing that.
Can you please help me on how I could install this specific video card's driver? I have tried everything I have found online and I don't know enough to make up solutions as I go. I can't change the brightness of the screen, can't connect extra monitors, can't use redshift (my eyes are sensitive) and can't even invert colors because of the lack of the driver.
Previously asked question here on the site
Bug Report with more information
Using Debian 8 with Gnome 3, my computer has two video cards an intel (integrated) and the NVIDIA card. Please tell me if more information is required.
Edit: to put the results of the comment
$ sudo apt-get install bbswitch-dkms intel-microcode firmware-linux-nonfree bumblebee bumblebee-nvidia primus primus-libs primus-libs:i386 linux-headers-$(uname -r) nvidia-driver
Reading package lists... Done
Building dependency tree
Reading state information... Done
bbswitch-dkms is already the newest version.
bbswitch-dkms set to manually installed.
primus is already the newest version.
primus-libs is already the newest version.
primus-libs set to manually installed.
bumblebee is already the newest version.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
bumblebee-nvidia : Depends: bumblebee (= 3.2.1-7) but 3.2.1-13~bpo8+1 is to be installed
E: Unable to correct problems, you have held broken packages.
Then did sudo apt-get -f install
just in case and it didn't remove or install anything.
debian drivers nvidia video proprietary-drivers
debian drivers nvidia video proprietary-drivers
edited Apr 13 '17 at 12:36
Community♦
1
1
asked Jan 30 '17 at 3:04
M.O.
1051314
1051314
Tryapt-get -t jessie-backports install bumblebee-nvidia
– Shadur
Feb 2 '17 at 15:41
To bypass the error from the output? And then install again the package with the problem and do the rest of the instructions the person below said?
– M.O.
Feb 2 '17 at 15:43
1
That should fix the output error - you're trying to install regular bumblebee-nvidia but at some point you installed the backports version of its parent, so there's a dependency mismatch apt is choking on.
– Shadur
Feb 2 '17 at 15:44
@Shadurapt-get -t jessie-backports install bumblebee-nvidia
gives the following output:The following packages have unmet dependencies: bumblebee-nvidia : Depends: glx-alternative-nvidia (>= 0.6.92) E: Unable to correct problems, you have held broken packages.
. And if I try to install nvidia-driverapt-get
always complains about 340 version is going to be installed and ignores jessie-backports. Could you please advise how to solve this?
– Ingvord
Jun 17 '17 at 5:59
add a comment |
Tryapt-get -t jessie-backports install bumblebee-nvidia
– Shadur
Feb 2 '17 at 15:41
To bypass the error from the output? And then install again the package with the problem and do the rest of the instructions the person below said?
– M.O.
Feb 2 '17 at 15:43
1
That should fix the output error - you're trying to install regular bumblebee-nvidia but at some point you installed the backports version of its parent, so there's a dependency mismatch apt is choking on.
– Shadur
Feb 2 '17 at 15:44
@Shadurapt-get -t jessie-backports install bumblebee-nvidia
gives the following output:The following packages have unmet dependencies: bumblebee-nvidia : Depends: glx-alternative-nvidia (>= 0.6.92) E: Unable to correct problems, you have held broken packages.
. And if I try to install nvidia-driverapt-get
always complains about 340 version is going to be installed and ignores jessie-backports. Could you please advise how to solve this?
– Ingvord
Jun 17 '17 at 5:59
Try
apt-get -t jessie-backports install bumblebee-nvidia
– Shadur
Feb 2 '17 at 15:41
Try
apt-get -t jessie-backports install bumblebee-nvidia
– Shadur
Feb 2 '17 at 15:41
To bypass the error from the output? And then install again the package with the problem and do the rest of the instructions the person below said?
– M.O.
Feb 2 '17 at 15:43
To bypass the error from the output? And then install again the package with the problem and do the rest of the instructions the person below said?
– M.O.
Feb 2 '17 at 15:43
1
1
That should fix the output error - you're trying to install regular bumblebee-nvidia but at some point you installed the backports version of its parent, so there's a dependency mismatch apt is choking on.
– Shadur
Feb 2 '17 at 15:44
That should fix the output error - you're trying to install regular bumblebee-nvidia but at some point you installed the backports version of its parent, so there's a dependency mismatch apt is choking on.
– Shadur
Feb 2 '17 at 15:44
@Shadur
apt-get -t jessie-backports install bumblebee-nvidia
gives the following output: The following packages have unmet dependencies: bumblebee-nvidia : Depends: glx-alternative-nvidia (>= 0.6.92) E: Unable to correct problems, you have held broken packages.
. And if I try to install nvidia-driver apt-get
always complains about 340 version is going to be installed and ignores jessie-backports. Could you please advise how to solve this?– Ingvord
Jun 17 '17 at 5:59
@Shadur
apt-get -t jessie-backports install bumblebee-nvidia
gives the following output: The following packages have unmet dependencies: bumblebee-nvidia : Depends: glx-alternative-nvidia (>= 0.6.92) E: Unable to correct problems, you have held broken packages.
. And if I try to install nvidia-driver apt-get
always complains about 340 version is going to be installed and ignores jessie-backports. Could you please advise how to solve this?– Ingvord
Jun 17 '17 at 5:59
add a comment |
2 Answers
2
active
oldest
votes
up vote
0
down vote
From what I'm gathering... you have a laptop with Optimus, eg you have an nvidia and intel GPU in your laptop. Long story short, it is not easy to get both working at the same time, though bumblebee is there as a hack to get around that.
I would explain the reason why you shouldn't use the .run file from nvidia's website, but the tl;dr about it is that it actually will damage your distribution by replacing libraries and other critical components. The fact you went the route with debian's own wiki was a good start.
First you need to enable the non-free repositories in /etc/apt/sources.list
and you need to enable the backports for Jessie (detailed on the same link you've provided for installing nvidia drivers for Debian). And then you can go from there:
dpkg --add-architecture i386
apt-get update
apt-get install bbswitch-dkms intel-microcode firmware-linux-nonfree bumblebee bumblebee-nvidia primus primus-libs primus-libs:i386 linux-headers-$(uname -r) nvidia-driver
And then modify /etc/bumblebee/bumblebee.conf:
KernelDriver=nvidia-current
Add yourself to the bumblebee group (required):
addgroup nazu bumblebee
You need to make a change to the GRUB command line in /etc/default/grub
. Add this:
GRUB_CMDLINE_LINUX_DEFAULT="quiet rcutree.rcu_idle_gp_delay=1"
Update grub.
update-grub
Go ahead and reboot. Most cases, it should work. In your case, I highly recommend doing a fresh installation of Debian since you've gone through multiple tries getting this to work. It's better to start fresh in this scenario.
Will try this later today after work. If it crashes will I have to return thebumblebee.conf
and/etc/default/grub
files to their original state? Or would it suffice to purge everything I installed?
– M.O.
Jan 30 '17 at 13:29
I dont think I was able to do it. I will edit the question so you can see what appeared when trying to install all the packages.
– M.O.
Jan 31 '17 at 2:22
I'm not sure, but isn't bumblebee discontinued? The last update on their webpage was 2013. bumblebee-project.org
– mrtnrdl
Jan 31 '17 at 7:44
add a comment |
up vote
0
down vote
apt-get -t jessie-backports install nvidia-driver bumblebee-nvidia primus xserver-xorg-video-nvidia nvidia-vdpau-driver nvidia-settings
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
From what I'm gathering... you have a laptop with Optimus, eg you have an nvidia and intel GPU in your laptop. Long story short, it is not easy to get both working at the same time, though bumblebee is there as a hack to get around that.
I would explain the reason why you shouldn't use the .run file from nvidia's website, but the tl;dr about it is that it actually will damage your distribution by replacing libraries and other critical components. The fact you went the route with debian's own wiki was a good start.
First you need to enable the non-free repositories in /etc/apt/sources.list
and you need to enable the backports for Jessie (detailed on the same link you've provided for installing nvidia drivers for Debian). And then you can go from there:
dpkg --add-architecture i386
apt-get update
apt-get install bbswitch-dkms intel-microcode firmware-linux-nonfree bumblebee bumblebee-nvidia primus primus-libs primus-libs:i386 linux-headers-$(uname -r) nvidia-driver
And then modify /etc/bumblebee/bumblebee.conf:
KernelDriver=nvidia-current
Add yourself to the bumblebee group (required):
addgroup nazu bumblebee
You need to make a change to the GRUB command line in /etc/default/grub
. Add this:
GRUB_CMDLINE_LINUX_DEFAULT="quiet rcutree.rcu_idle_gp_delay=1"
Update grub.
update-grub
Go ahead and reboot. Most cases, it should work. In your case, I highly recommend doing a fresh installation of Debian since you've gone through multiple tries getting this to work. It's better to start fresh in this scenario.
Will try this later today after work. If it crashes will I have to return thebumblebee.conf
and/etc/default/grub
files to their original state? Or would it suffice to purge everything I installed?
– M.O.
Jan 30 '17 at 13:29
I dont think I was able to do it. I will edit the question so you can see what appeared when trying to install all the packages.
– M.O.
Jan 31 '17 at 2:22
I'm not sure, but isn't bumblebee discontinued? The last update on their webpage was 2013. bumblebee-project.org
– mrtnrdl
Jan 31 '17 at 7:44
add a comment |
up vote
0
down vote
From what I'm gathering... you have a laptop with Optimus, eg you have an nvidia and intel GPU in your laptop. Long story short, it is not easy to get both working at the same time, though bumblebee is there as a hack to get around that.
I would explain the reason why you shouldn't use the .run file from nvidia's website, but the tl;dr about it is that it actually will damage your distribution by replacing libraries and other critical components. The fact you went the route with debian's own wiki was a good start.
First you need to enable the non-free repositories in /etc/apt/sources.list
and you need to enable the backports for Jessie (detailed on the same link you've provided for installing nvidia drivers for Debian). And then you can go from there:
dpkg --add-architecture i386
apt-get update
apt-get install bbswitch-dkms intel-microcode firmware-linux-nonfree bumblebee bumblebee-nvidia primus primus-libs primus-libs:i386 linux-headers-$(uname -r) nvidia-driver
And then modify /etc/bumblebee/bumblebee.conf:
KernelDriver=nvidia-current
Add yourself to the bumblebee group (required):
addgroup nazu bumblebee
You need to make a change to the GRUB command line in /etc/default/grub
. Add this:
GRUB_CMDLINE_LINUX_DEFAULT="quiet rcutree.rcu_idle_gp_delay=1"
Update grub.
update-grub
Go ahead and reboot. Most cases, it should work. In your case, I highly recommend doing a fresh installation of Debian since you've gone through multiple tries getting this to work. It's better to start fresh in this scenario.
Will try this later today after work. If it crashes will I have to return thebumblebee.conf
and/etc/default/grub
files to their original state? Or would it suffice to purge everything I installed?
– M.O.
Jan 30 '17 at 13:29
I dont think I was able to do it. I will edit the question so you can see what appeared when trying to install all the packages.
– M.O.
Jan 31 '17 at 2:22
I'm not sure, but isn't bumblebee discontinued? The last update on their webpage was 2013. bumblebee-project.org
– mrtnrdl
Jan 31 '17 at 7:44
add a comment |
up vote
0
down vote
up vote
0
down vote
From what I'm gathering... you have a laptop with Optimus, eg you have an nvidia and intel GPU in your laptop. Long story short, it is not easy to get both working at the same time, though bumblebee is there as a hack to get around that.
I would explain the reason why you shouldn't use the .run file from nvidia's website, but the tl;dr about it is that it actually will damage your distribution by replacing libraries and other critical components. The fact you went the route with debian's own wiki was a good start.
First you need to enable the non-free repositories in /etc/apt/sources.list
and you need to enable the backports for Jessie (detailed on the same link you've provided for installing nvidia drivers for Debian). And then you can go from there:
dpkg --add-architecture i386
apt-get update
apt-get install bbswitch-dkms intel-microcode firmware-linux-nonfree bumblebee bumblebee-nvidia primus primus-libs primus-libs:i386 linux-headers-$(uname -r) nvidia-driver
And then modify /etc/bumblebee/bumblebee.conf:
KernelDriver=nvidia-current
Add yourself to the bumblebee group (required):
addgroup nazu bumblebee
You need to make a change to the GRUB command line in /etc/default/grub
. Add this:
GRUB_CMDLINE_LINUX_DEFAULT="quiet rcutree.rcu_idle_gp_delay=1"
Update grub.
update-grub
Go ahead and reboot. Most cases, it should work. In your case, I highly recommend doing a fresh installation of Debian since you've gone through multiple tries getting this to work. It's better to start fresh in this scenario.
From what I'm gathering... you have a laptop with Optimus, eg you have an nvidia and intel GPU in your laptop. Long story short, it is not easy to get both working at the same time, though bumblebee is there as a hack to get around that.
I would explain the reason why you shouldn't use the .run file from nvidia's website, but the tl;dr about it is that it actually will damage your distribution by replacing libraries and other critical components. The fact you went the route with debian's own wiki was a good start.
First you need to enable the non-free repositories in /etc/apt/sources.list
and you need to enable the backports for Jessie (detailed on the same link you've provided for installing nvidia drivers for Debian). And then you can go from there:
dpkg --add-architecture i386
apt-get update
apt-get install bbswitch-dkms intel-microcode firmware-linux-nonfree bumblebee bumblebee-nvidia primus primus-libs primus-libs:i386 linux-headers-$(uname -r) nvidia-driver
And then modify /etc/bumblebee/bumblebee.conf:
KernelDriver=nvidia-current
Add yourself to the bumblebee group (required):
addgroup nazu bumblebee
You need to make a change to the GRUB command line in /etc/default/grub
. Add this:
GRUB_CMDLINE_LINUX_DEFAULT="quiet rcutree.rcu_idle_gp_delay=1"
Update grub.
update-grub
Go ahead and reboot. Most cases, it should work. In your case, I highly recommend doing a fresh installation of Debian since you've gone through multiple tries getting this to work. It's better to start fresh in this scenario.
answered Jan 30 '17 at 5:33
Sokel
1,40158
1,40158
Will try this later today after work. If it crashes will I have to return thebumblebee.conf
and/etc/default/grub
files to their original state? Or would it suffice to purge everything I installed?
– M.O.
Jan 30 '17 at 13:29
I dont think I was able to do it. I will edit the question so you can see what appeared when trying to install all the packages.
– M.O.
Jan 31 '17 at 2:22
I'm not sure, but isn't bumblebee discontinued? The last update on their webpage was 2013. bumblebee-project.org
– mrtnrdl
Jan 31 '17 at 7:44
add a comment |
Will try this later today after work. If it crashes will I have to return thebumblebee.conf
and/etc/default/grub
files to their original state? Or would it suffice to purge everything I installed?
– M.O.
Jan 30 '17 at 13:29
I dont think I was able to do it. I will edit the question so you can see what appeared when trying to install all the packages.
– M.O.
Jan 31 '17 at 2:22
I'm not sure, but isn't bumblebee discontinued? The last update on their webpage was 2013. bumblebee-project.org
– mrtnrdl
Jan 31 '17 at 7:44
Will try this later today after work. If it crashes will I have to return the
bumblebee.conf
and /etc/default/grub
files to their original state? Or would it suffice to purge everything I installed?– M.O.
Jan 30 '17 at 13:29
Will try this later today after work. If it crashes will I have to return the
bumblebee.conf
and /etc/default/grub
files to their original state? Or would it suffice to purge everything I installed?– M.O.
Jan 30 '17 at 13:29
I dont think I was able to do it. I will edit the question so you can see what appeared when trying to install all the packages.
– M.O.
Jan 31 '17 at 2:22
I dont think I was able to do it. I will edit the question so you can see what appeared when trying to install all the packages.
– M.O.
Jan 31 '17 at 2:22
I'm not sure, but isn't bumblebee discontinued? The last update on their webpage was 2013. bumblebee-project.org
– mrtnrdl
Jan 31 '17 at 7:44
I'm not sure, but isn't bumblebee discontinued? The last update on their webpage was 2013. bumblebee-project.org
– mrtnrdl
Jan 31 '17 at 7:44
add a comment |
up vote
0
down vote
apt-get -t jessie-backports install nvidia-driver bumblebee-nvidia primus xserver-xorg-video-nvidia nvidia-vdpau-driver nvidia-settings
add a comment |
up vote
0
down vote
apt-get -t jessie-backports install nvidia-driver bumblebee-nvidia primus xserver-xorg-video-nvidia nvidia-vdpau-driver nvidia-settings
add a comment |
up vote
0
down vote
up vote
0
down vote
apt-get -t jessie-backports install nvidia-driver bumblebee-nvidia primus xserver-xorg-video-nvidia nvidia-vdpau-driver nvidia-settings
apt-get -t jessie-backports install nvidia-driver bumblebee-nvidia primus xserver-xorg-video-nvidia nvidia-vdpau-driver nvidia-settings
answered Feb 4 '17 at 11:12
user192526
add a comment |
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f341099%2fdriver-installation-nvidia-geforce-940-mx-not-possible%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Try
apt-get -t jessie-backports install bumblebee-nvidia
– Shadur
Feb 2 '17 at 15:41
To bypass the error from the output? And then install again the package with the problem and do the rest of the instructions the person below said?
– M.O.
Feb 2 '17 at 15:43
1
That should fix the output error - you're trying to install regular bumblebee-nvidia but at some point you installed the backports version of its parent, so there's a dependency mismatch apt is choking on.
– Shadur
Feb 2 '17 at 15:44
@Shadur
apt-get -t jessie-backports install bumblebee-nvidia
gives the following output:The following packages have unmet dependencies: bumblebee-nvidia : Depends: glx-alternative-nvidia (>= 0.6.92) E: Unable to correct problems, you have held broken packages.
. And if I try to install nvidia-driverapt-get
always complains about 340 version is going to be installed and ignores jessie-backports. Could you please advise how to solve this?– Ingvord
Jun 17 '17 at 5:59