How to imitate great looking Motion Mountain ToC, including hyperlinks?
I wanted to customize my ToC to look more or less like the one in Motion Mountain physics textbook, including clickable page numbers. My decision was to use hyperref
and titletoc
packages. Now it seems like there is a problem with compatibility (I guess) of these two.
Background. Table o contents of my article
-class document shows only sections and subsections. Sections (both labeled/numbered and not) are supposed to be format with basic titlecontents
, while subsections with the starred version. It looks like the latter is the cause of the bad linking.
The problem. Everytime a given section follows one with subsections, the former is improperly linked to first of these subsections. Every other section and all subsections are OK.
MWE:
documentclass{article}
usepackage[cp1250]{inputenc}
usepackage[T1]{fontenc}
usepackage{titletoc}
titlecontents{section}[.5pc]%
{addvspace{.5pc}normalsizemakebox[2pc][r]{thecontentspagehspace{1pc}}}%
{makebox[2.5pc][r]{thecontentslabelhspace{1pc}}}%
{makebox[2.5pc][r]{null}}%
{}%
% comment this starred part and it does work...
titlecontents*{subsection}[6.5pc]%
{small}{}{}%
{hspace{5pt}thecontentspage}%
[ textbullet ]
usepackage[colorlinks,linktoc=page]{hyperref}
begin{document}
% Frontmatter - only unnumbered/unlabeled sections
pagenumbering{roman}
section*{Frontmatter Section Pre-TOC}
% TOC ...goes to TOC.
clearpage
phantomsection
addcontentsline{toc}{section}{contentsname}
tableofcontents
clearpage
phantomsection
section*{Frontmatter Section 1}
addcontentsline{toc}{section}{Frontmatter Section 1}
clearpage
phantomsection
section*{Frontmatter Section 2}
addcontentsline{toc}{section}{Frontmatter Section 2}
% Mainmatter - only numbered/labeled sections
clearpage
pagenumbering{arabic}
clearpage
section{Section 1}
subsection{Subsection 1.1}
subsection{Subsection 1.2}
subsection{Subsection 1.3}
clearpage
section{Section 2}
clearpage
section{Section 3}
subsection{Subsection 3.1}
subsection{Subsection 3.2}
clearpage
section{Section 4}
subsection{Subsection 4.1}
subsection{Subsection 4.2}
subsection{Subsection 4.3}
subsection{Subsection 4.4}
subsection{Subsection 4.5}
clearpage
section{Section 5}
clearpage
section{Section 6}
subsection{Subsection 6.1}
subsection{Subsection 6.2}
subsection{Subsection 6.3}
% Backmatter - all (sub)sections w/o labels
clearpage
phantomsection
section*{Backmatter Section 1}
addcontentsline{toc}{section}{Backmatter Section 1}
phantomsection
subsection*{Backmatter Subsection 1.1}
addcontentsline{toc}{subsection}{Backmatter Subsection 1.1}
phantomsection
subsection*{Backmatter Subsection 1.2}
addcontentsline{toc}{subsection}{Backmatter Subsection 1.2}
clearpage
phantomsection
section*{Backmatter Section 2}
addcontentsline{toc}{section}{Backmatter Section 2}
clearpage
phantomsection
section*{Backmatter Section 3}
addcontentsline{toc}{section}{Backmatter Section 3}
end{document}
So it looks like it is all caused by the starred titlecontents*
...
I added clearpage
s just to lengthen the output file and add some pages, that does not change anything else.
Thanks in advance for helping me figure this out.
EDIT:
Maybe a possible workaround would be using etoolbox
lists with custom counters, most likely with custom links, too?
EDIT 2:
Is there anybody who at least managed to reproduce the error with given MWE? ;-) I somewhat know that hyperref
doesn't talk to titletoc
much, but have no idea to what extent they're incompatible with each other. In other words, is my problem a common one? Or maybe the opposite: is it too localized? Answer even to that question would mean something to me :-)
To summarize this: it seems it's all about some issues with the starred titlecontents*
macro. All links are fine using the classic one -- it gets messy only if you group ToC entries in one paragraph...
I did some timid attempts to work it out, found examples and made some progress... Now I see it's the hyperref
thing, it's just something wrong with the link-algorithm in grouped ToC. Initially I blamed titletoc
only, so tried to make my ToC look the same using other tools. That of course was a dead end, to say the least. Links were everytime wrong in the same manner. I feel helpless...
Anyway, maybe someone could give me a hand and try to work on these links only? I would appreciate the smallest feedback :-)
table-of-contents hyperref cross-referencing counters titletoc
add a comment |
I wanted to customize my ToC to look more or less like the one in Motion Mountain physics textbook, including clickable page numbers. My decision was to use hyperref
and titletoc
packages. Now it seems like there is a problem with compatibility (I guess) of these two.
Background. Table o contents of my article
-class document shows only sections and subsections. Sections (both labeled/numbered and not) are supposed to be format with basic titlecontents
, while subsections with the starred version. It looks like the latter is the cause of the bad linking.
The problem. Everytime a given section follows one with subsections, the former is improperly linked to first of these subsections. Every other section and all subsections are OK.
MWE:
documentclass{article}
usepackage[cp1250]{inputenc}
usepackage[T1]{fontenc}
usepackage{titletoc}
titlecontents{section}[.5pc]%
{addvspace{.5pc}normalsizemakebox[2pc][r]{thecontentspagehspace{1pc}}}%
{makebox[2.5pc][r]{thecontentslabelhspace{1pc}}}%
{makebox[2.5pc][r]{null}}%
{}%
% comment this starred part and it does work...
titlecontents*{subsection}[6.5pc]%
{small}{}{}%
{hspace{5pt}thecontentspage}%
[ textbullet ]
usepackage[colorlinks,linktoc=page]{hyperref}
begin{document}
% Frontmatter - only unnumbered/unlabeled sections
pagenumbering{roman}
section*{Frontmatter Section Pre-TOC}
% TOC ...goes to TOC.
clearpage
phantomsection
addcontentsline{toc}{section}{contentsname}
tableofcontents
clearpage
phantomsection
section*{Frontmatter Section 1}
addcontentsline{toc}{section}{Frontmatter Section 1}
clearpage
phantomsection
section*{Frontmatter Section 2}
addcontentsline{toc}{section}{Frontmatter Section 2}
% Mainmatter - only numbered/labeled sections
clearpage
pagenumbering{arabic}
clearpage
section{Section 1}
subsection{Subsection 1.1}
subsection{Subsection 1.2}
subsection{Subsection 1.3}
clearpage
section{Section 2}
clearpage
section{Section 3}
subsection{Subsection 3.1}
subsection{Subsection 3.2}
clearpage
section{Section 4}
subsection{Subsection 4.1}
subsection{Subsection 4.2}
subsection{Subsection 4.3}
subsection{Subsection 4.4}
subsection{Subsection 4.5}
clearpage
section{Section 5}
clearpage
section{Section 6}
subsection{Subsection 6.1}
subsection{Subsection 6.2}
subsection{Subsection 6.3}
% Backmatter - all (sub)sections w/o labels
clearpage
phantomsection
section*{Backmatter Section 1}
addcontentsline{toc}{section}{Backmatter Section 1}
phantomsection
subsection*{Backmatter Subsection 1.1}
addcontentsline{toc}{subsection}{Backmatter Subsection 1.1}
phantomsection
subsection*{Backmatter Subsection 1.2}
addcontentsline{toc}{subsection}{Backmatter Subsection 1.2}
clearpage
phantomsection
section*{Backmatter Section 2}
addcontentsline{toc}{section}{Backmatter Section 2}
clearpage
phantomsection
section*{Backmatter Section 3}
addcontentsline{toc}{section}{Backmatter Section 3}
end{document}
So it looks like it is all caused by the starred titlecontents*
...
I added clearpage
s just to lengthen the output file and add some pages, that does not change anything else.
Thanks in advance for helping me figure this out.
EDIT:
Maybe a possible workaround would be using etoolbox
lists with custom counters, most likely with custom links, too?
EDIT 2:
Is there anybody who at least managed to reproduce the error with given MWE? ;-) I somewhat know that hyperref
doesn't talk to titletoc
much, but have no idea to what extent they're incompatible with each other. In other words, is my problem a common one? Or maybe the opposite: is it too localized? Answer even to that question would mean something to me :-)
To summarize this: it seems it's all about some issues with the starred titlecontents*
macro. All links are fine using the classic one -- it gets messy only if you group ToC entries in one paragraph...
I did some timid attempts to work it out, found examples and made some progress... Now I see it's the hyperref
thing, it's just something wrong with the link-algorithm in grouped ToC. Initially I blamed titletoc
only, so tried to make my ToC look the same using other tools. That of course was a dead end, to say the least. Links were everytime wrong in the same manner. I feel helpless...
Anyway, maybe someone could give me a hand and try to work on these links only? I would appreciate the smallest feedback :-)
table-of-contents hyperref cross-referencing counters titletoc
I did it! :-) Everything works: layout is OK, links are OK. It looks great and wasn't that hard in the end ;-)
– bartek
Mar 10 '14 at 11:55
2
Sorry you haven't gotten much response on this one, but great that you worked it out. Could post an answer showing your solution? That could be helpful for other people seeing this question.
– Torbjørn T.
Mar 10 '14 at 12:41
Sure, I just posted my solution. Looking forward for improvements ;-)
– bartek
Mar 13 '14 at 14:32
add a comment |
I wanted to customize my ToC to look more or less like the one in Motion Mountain physics textbook, including clickable page numbers. My decision was to use hyperref
and titletoc
packages. Now it seems like there is a problem with compatibility (I guess) of these two.
Background. Table o contents of my article
-class document shows only sections and subsections. Sections (both labeled/numbered and not) are supposed to be format with basic titlecontents
, while subsections with the starred version. It looks like the latter is the cause of the bad linking.
The problem. Everytime a given section follows one with subsections, the former is improperly linked to first of these subsections. Every other section and all subsections are OK.
MWE:
documentclass{article}
usepackage[cp1250]{inputenc}
usepackage[T1]{fontenc}
usepackage{titletoc}
titlecontents{section}[.5pc]%
{addvspace{.5pc}normalsizemakebox[2pc][r]{thecontentspagehspace{1pc}}}%
{makebox[2.5pc][r]{thecontentslabelhspace{1pc}}}%
{makebox[2.5pc][r]{null}}%
{}%
% comment this starred part and it does work...
titlecontents*{subsection}[6.5pc]%
{small}{}{}%
{hspace{5pt}thecontentspage}%
[ textbullet ]
usepackage[colorlinks,linktoc=page]{hyperref}
begin{document}
% Frontmatter - only unnumbered/unlabeled sections
pagenumbering{roman}
section*{Frontmatter Section Pre-TOC}
% TOC ...goes to TOC.
clearpage
phantomsection
addcontentsline{toc}{section}{contentsname}
tableofcontents
clearpage
phantomsection
section*{Frontmatter Section 1}
addcontentsline{toc}{section}{Frontmatter Section 1}
clearpage
phantomsection
section*{Frontmatter Section 2}
addcontentsline{toc}{section}{Frontmatter Section 2}
% Mainmatter - only numbered/labeled sections
clearpage
pagenumbering{arabic}
clearpage
section{Section 1}
subsection{Subsection 1.1}
subsection{Subsection 1.2}
subsection{Subsection 1.3}
clearpage
section{Section 2}
clearpage
section{Section 3}
subsection{Subsection 3.1}
subsection{Subsection 3.2}
clearpage
section{Section 4}
subsection{Subsection 4.1}
subsection{Subsection 4.2}
subsection{Subsection 4.3}
subsection{Subsection 4.4}
subsection{Subsection 4.5}
clearpage
section{Section 5}
clearpage
section{Section 6}
subsection{Subsection 6.1}
subsection{Subsection 6.2}
subsection{Subsection 6.3}
% Backmatter - all (sub)sections w/o labels
clearpage
phantomsection
section*{Backmatter Section 1}
addcontentsline{toc}{section}{Backmatter Section 1}
phantomsection
subsection*{Backmatter Subsection 1.1}
addcontentsline{toc}{subsection}{Backmatter Subsection 1.1}
phantomsection
subsection*{Backmatter Subsection 1.2}
addcontentsline{toc}{subsection}{Backmatter Subsection 1.2}
clearpage
phantomsection
section*{Backmatter Section 2}
addcontentsline{toc}{section}{Backmatter Section 2}
clearpage
phantomsection
section*{Backmatter Section 3}
addcontentsline{toc}{section}{Backmatter Section 3}
end{document}
So it looks like it is all caused by the starred titlecontents*
...
I added clearpage
s just to lengthen the output file and add some pages, that does not change anything else.
Thanks in advance for helping me figure this out.
EDIT:
Maybe a possible workaround would be using etoolbox
lists with custom counters, most likely with custom links, too?
EDIT 2:
Is there anybody who at least managed to reproduce the error with given MWE? ;-) I somewhat know that hyperref
doesn't talk to titletoc
much, but have no idea to what extent they're incompatible with each other. In other words, is my problem a common one? Or maybe the opposite: is it too localized? Answer even to that question would mean something to me :-)
To summarize this: it seems it's all about some issues with the starred titlecontents*
macro. All links are fine using the classic one -- it gets messy only if you group ToC entries in one paragraph...
I did some timid attempts to work it out, found examples and made some progress... Now I see it's the hyperref
thing, it's just something wrong with the link-algorithm in grouped ToC. Initially I blamed titletoc
only, so tried to make my ToC look the same using other tools. That of course was a dead end, to say the least. Links were everytime wrong in the same manner. I feel helpless...
Anyway, maybe someone could give me a hand and try to work on these links only? I would appreciate the smallest feedback :-)
table-of-contents hyperref cross-referencing counters titletoc
I wanted to customize my ToC to look more or less like the one in Motion Mountain physics textbook, including clickable page numbers. My decision was to use hyperref
and titletoc
packages. Now it seems like there is a problem with compatibility (I guess) of these two.
Background. Table o contents of my article
-class document shows only sections and subsections. Sections (both labeled/numbered and not) are supposed to be format with basic titlecontents
, while subsections with the starred version. It looks like the latter is the cause of the bad linking.
The problem. Everytime a given section follows one with subsections, the former is improperly linked to first of these subsections. Every other section and all subsections are OK.
MWE:
documentclass{article}
usepackage[cp1250]{inputenc}
usepackage[T1]{fontenc}
usepackage{titletoc}
titlecontents{section}[.5pc]%
{addvspace{.5pc}normalsizemakebox[2pc][r]{thecontentspagehspace{1pc}}}%
{makebox[2.5pc][r]{thecontentslabelhspace{1pc}}}%
{makebox[2.5pc][r]{null}}%
{}%
% comment this starred part and it does work...
titlecontents*{subsection}[6.5pc]%
{small}{}{}%
{hspace{5pt}thecontentspage}%
[ textbullet ]
usepackage[colorlinks,linktoc=page]{hyperref}
begin{document}
% Frontmatter - only unnumbered/unlabeled sections
pagenumbering{roman}
section*{Frontmatter Section Pre-TOC}
% TOC ...goes to TOC.
clearpage
phantomsection
addcontentsline{toc}{section}{contentsname}
tableofcontents
clearpage
phantomsection
section*{Frontmatter Section 1}
addcontentsline{toc}{section}{Frontmatter Section 1}
clearpage
phantomsection
section*{Frontmatter Section 2}
addcontentsline{toc}{section}{Frontmatter Section 2}
% Mainmatter - only numbered/labeled sections
clearpage
pagenumbering{arabic}
clearpage
section{Section 1}
subsection{Subsection 1.1}
subsection{Subsection 1.2}
subsection{Subsection 1.3}
clearpage
section{Section 2}
clearpage
section{Section 3}
subsection{Subsection 3.1}
subsection{Subsection 3.2}
clearpage
section{Section 4}
subsection{Subsection 4.1}
subsection{Subsection 4.2}
subsection{Subsection 4.3}
subsection{Subsection 4.4}
subsection{Subsection 4.5}
clearpage
section{Section 5}
clearpage
section{Section 6}
subsection{Subsection 6.1}
subsection{Subsection 6.2}
subsection{Subsection 6.3}
% Backmatter - all (sub)sections w/o labels
clearpage
phantomsection
section*{Backmatter Section 1}
addcontentsline{toc}{section}{Backmatter Section 1}
phantomsection
subsection*{Backmatter Subsection 1.1}
addcontentsline{toc}{subsection}{Backmatter Subsection 1.1}
phantomsection
subsection*{Backmatter Subsection 1.2}
addcontentsline{toc}{subsection}{Backmatter Subsection 1.2}
clearpage
phantomsection
section*{Backmatter Section 2}
addcontentsline{toc}{section}{Backmatter Section 2}
clearpage
phantomsection
section*{Backmatter Section 3}
addcontentsline{toc}{section}{Backmatter Section 3}
end{document}
So it looks like it is all caused by the starred titlecontents*
...
I added clearpage
s just to lengthen the output file and add some pages, that does not change anything else.
Thanks in advance for helping me figure this out.
EDIT:
Maybe a possible workaround would be using etoolbox
lists with custom counters, most likely with custom links, too?
EDIT 2:
Is there anybody who at least managed to reproduce the error with given MWE? ;-) I somewhat know that hyperref
doesn't talk to titletoc
much, but have no idea to what extent they're incompatible with each other. In other words, is my problem a common one? Or maybe the opposite: is it too localized? Answer even to that question would mean something to me :-)
To summarize this: it seems it's all about some issues with the starred titlecontents*
macro. All links are fine using the classic one -- it gets messy only if you group ToC entries in one paragraph...
I did some timid attempts to work it out, found examples and made some progress... Now I see it's the hyperref
thing, it's just something wrong with the link-algorithm in grouped ToC. Initially I blamed titletoc
only, so tried to make my ToC look the same using other tools. That of course was a dead end, to say the least. Links were everytime wrong in the same manner. I feel helpless...
Anyway, maybe someone could give me a hand and try to work on these links only? I would appreciate the smallest feedback :-)
table-of-contents hyperref cross-referencing counters titletoc
table-of-contents hyperref cross-referencing counters titletoc
edited 5 mins ago
bartek
asked Feb 28 '14 at 3:12
bartekbartek
1061210
1061210
I did it! :-) Everything works: layout is OK, links are OK. It looks great and wasn't that hard in the end ;-)
– bartek
Mar 10 '14 at 11:55
2
Sorry you haven't gotten much response on this one, but great that you worked it out. Could post an answer showing your solution? That could be helpful for other people seeing this question.
– Torbjørn T.
Mar 10 '14 at 12:41
Sure, I just posted my solution. Looking forward for improvements ;-)
– bartek
Mar 13 '14 at 14:32
add a comment |
I did it! :-) Everything works: layout is OK, links are OK. It looks great and wasn't that hard in the end ;-)
– bartek
Mar 10 '14 at 11:55
2
Sorry you haven't gotten much response on this one, but great that you worked it out. Could post an answer showing your solution? That could be helpful for other people seeing this question.
– Torbjørn T.
Mar 10 '14 at 12:41
Sure, I just posted my solution. Looking forward for improvements ;-)
– bartek
Mar 13 '14 at 14:32
I did it! :-) Everything works: layout is OK, links are OK. It looks great and wasn't that hard in the end ;-)
– bartek
Mar 10 '14 at 11:55
I did it! :-) Everything works: layout is OK, links are OK. It looks great and wasn't that hard in the end ;-)
– bartek
Mar 10 '14 at 11:55
2
2
Sorry you haven't gotten much response on this one, but great that you worked it out. Could post an answer showing your solution? That could be helpful for other people seeing this question.
– Torbjørn T.
Mar 10 '14 at 12:41
Sorry you haven't gotten much response on this one, but great that you worked it out. Could post an answer showing your solution? That could be helpful for other people seeing this question.
– Torbjørn T.
Mar 10 '14 at 12:41
Sure, I just posted my solution. Looking forward for improvements ;-)
– bartek
Mar 13 '14 at 14:32
Sure, I just posted my solution. Looking forward for improvements ;-)
– bartek
Mar 13 '14 at 14:32
add a comment |
1 Answer
1
active
oldest
votes
My solution goes like this (I actually extended this to include the subsubsections too):
Load
hyperref
w/o ToC links (optionlinktoc=none
) to define them manually. Here I decided that sections should link to whole pages they start on, while subsections link normally.Define custom counter for numberred subsections -- for referencing, in main matter only.
Customize ToC entries for sections with
titletoc
(it's easier).Customize Toc entries for sub- and subsubsections with redefining
l@subsection
andl@subsubsection
respectively, with help of someetoolbox
toggles. I could customize these entries withtitletoc
, but then they would not be justified and therefore look much worse.Finally, switch
hypersetup{linktoc=page}
so that links on pages like List of Figures etc will work normally.
The code:
documentclass[12pt]{article}
usepackage[cp1250]{inputenc}
usepackage{lmodern} % for the looks
usepackage{biolinum} % for the looks
usepackage[T1]{fontenc}
usepackage{etoolbox}
usepackage{titletoc}
usepackage[colorlinks,linktoc=none]{hyperref}
newcounter{numSubSection}
setcounter{numSubSection}{0}
gpreto{subsection}{%
refstepcounter{numSubSection}}%
titlecontents{section}[0pt]%
{addvspace{6pt}sffamilybfseriesnormalsize%
makebox[18pt][r]{%
hyperlink{page.thecontentspage}{textbf{thecontentspage}}%
hspace{6pt}}}%
{makebox[30pt][r]{thecontentslabelhspace{12pt}}}%
{makebox[30pt][r]{null}}%
{}%
makeatletter
newlength{TOCleftSkip}
setlength{TOCleftSkip}{66pt}%
newlength{TOCrightSkip}
setlength{TOCrightSkip}{18pt}%
newtoggle{ifSub}
togglefalse{ifSub}%
newtoggle{ifSection}
toggletrue{ifSection}%
newcounter{RefSubSection}%
setcounter{RefSubSection}{0}%
renewcommand*theRefSubSection{@arabicc@RefSubSection}%
renewcommand*{tableofcontents}{%
section*{contentsname}%
addcontentsline{toc}{section}{contentsname}%
toggletrue{ifSection}%
setcounter{RefSubSection}{0}%
@starttoc{toc}}%
gpreto{l@section}{%
nottoggle{ifSection}
{par%
addtolength{leftskip}{-TOCleftSkip}%
addtolength{rightskip}{-TOCrightSkip}%
togglefalse{ifSub}}{}%
toggletrue{ifSection}}%
renewcommand*{l@subsection}[2]{%
stepcounter{RefSubSection}%
toggletrue{ifSub}%
iftoggle{ifSection}
{togglefalse{ifSection}%
addtolength{leftskip}{TOCleftSkip}%
addtolength{rightskip}{TOCrightSkip}%
noindent}%
{unskipbegingroupupshapesmall textbullet~endgroup}%
begingroup%
upshapesmall#1 hyperlink{numSubSection.theRefSubSection}{textbf{#2}}%
endgroup}%
renewcommand*{l@subsubsection}[2]{%
iftoggle{ifSection}
{togglefalse{ifSection}%
addtolength{leftskip}{TOCleftSkip}%
addtolength{rightskip}{TOCrightSkip}%
noindent}%
{iftoggle{ifSub}
{togglefalse{ifSub}relax%
unskipbegingroupupshapesmall: endgroup}%
{unskipbegingroupitshapesmall, endgroup}}%
begingroupitshapesmall#1endgroup}%
renewcommand*{numberline}[1]{}%
makeatother
% solution ends here, code below is just for the example
begin{document}
% Frontmatter - only unnumbered/unlabeled sections
pagenumbering{roman}
clearpage
tableofcontents
clearpage
section*{Preface}
addcontentsline{toc}{section}{Preface}
clearpage
section*{Another Preface}
addcontentsline{toc}{section}{Another Preface}
% Mainmatter - only numbered/labeled sections
clearpage
addtocontents{toc}{protectvspace{18pt}} % just some separation
pagenumbering{arabic}
%clearpage
section{First}
subsection{Australia}
subsubsection{Alpha}
subsubsection{Beta}
subsubsection{Charlie}
subsubsection{Delta}
subsubsection{Echo}
subsubsection{Foxtrot}
subsection{Brazil}
subsubsection{Golf}
subsubsection{Hotel}
subsubsection{India}
subsection{Canada}
clearpage
section{Second}
clearpage
section{Third}
subsection{Denmark}
subsubsection{Juliet}
subsubsection{Kilo}
subsubsection{Lima}
subsubsection{Mike}
subsubsection{November}
subsection{Egypt}
subsubsection{Oscar}
subsubsection{Papa}
subsubsection{Quebec}
subsubsection{Romeo}
clearpage
section{Fourth}
subsection{Georgia}
subsubsection{Sierra}
subsection{Haiti}
subsubsection{Tango}
subsubsection{Uniform}
subsubsection{Victor}
subsubsection{Whiskey}
subsection{Iceland}
subsection{Japan}
subsubsection{X-ray}
subsubsection{Yankee}
subsubsection{Zulu}
subsubsection{Alpha}
subsubsection{Beta}
subsubsection{Charlie}
subsubsection{Delta}
subsubsection{Echo}
subsection{Kenya}
subsubsection{Foxtrot}
subsection{Laos}
subsubsection{Golf}
subsubsection{Hotel}
subsubsection{India}
subsubsection{Juliet}
subsubsection{Kilo}
% Backmatter - all (sub)sections w/o labels
clearpage
addtocontents{toc}{protectvspace{18pt}} % just some separation
hypersetup{linktoc=page}
section*{References}
addcontentsline{toc}{section}{References}
clearpage
section*{List of Figures}
addcontentsline{toc}{section}{List of Figures}
clearpage
section*{Index}
addcontentsline{toc}{section}{Index}
end{document}
This could most likely be done much easier/prettier, but at least it does the job. Hopefully everything is quite clear ;-)
The code translates to something like this:
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f162846%2fhow-to-imitate-great-looking-motion-mountain-toc-including-hyperlinks%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
My solution goes like this (I actually extended this to include the subsubsections too):
Load
hyperref
w/o ToC links (optionlinktoc=none
) to define them manually. Here I decided that sections should link to whole pages they start on, while subsections link normally.Define custom counter for numberred subsections -- for referencing, in main matter only.
Customize ToC entries for sections with
titletoc
(it's easier).Customize Toc entries for sub- and subsubsections with redefining
l@subsection
andl@subsubsection
respectively, with help of someetoolbox
toggles. I could customize these entries withtitletoc
, but then they would not be justified and therefore look much worse.Finally, switch
hypersetup{linktoc=page}
so that links on pages like List of Figures etc will work normally.
The code:
documentclass[12pt]{article}
usepackage[cp1250]{inputenc}
usepackage{lmodern} % for the looks
usepackage{biolinum} % for the looks
usepackage[T1]{fontenc}
usepackage{etoolbox}
usepackage{titletoc}
usepackage[colorlinks,linktoc=none]{hyperref}
newcounter{numSubSection}
setcounter{numSubSection}{0}
gpreto{subsection}{%
refstepcounter{numSubSection}}%
titlecontents{section}[0pt]%
{addvspace{6pt}sffamilybfseriesnormalsize%
makebox[18pt][r]{%
hyperlink{page.thecontentspage}{textbf{thecontentspage}}%
hspace{6pt}}}%
{makebox[30pt][r]{thecontentslabelhspace{12pt}}}%
{makebox[30pt][r]{null}}%
{}%
makeatletter
newlength{TOCleftSkip}
setlength{TOCleftSkip}{66pt}%
newlength{TOCrightSkip}
setlength{TOCrightSkip}{18pt}%
newtoggle{ifSub}
togglefalse{ifSub}%
newtoggle{ifSection}
toggletrue{ifSection}%
newcounter{RefSubSection}%
setcounter{RefSubSection}{0}%
renewcommand*theRefSubSection{@arabicc@RefSubSection}%
renewcommand*{tableofcontents}{%
section*{contentsname}%
addcontentsline{toc}{section}{contentsname}%
toggletrue{ifSection}%
setcounter{RefSubSection}{0}%
@starttoc{toc}}%
gpreto{l@section}{%
nottoggle{ifSection}
{par%
addtolength{leftskip}{-TOCleftSkip}%
addtolength{rightskip}{-TOCrightSkip}%
togglefalse{ifSub}}{}%
toggletrue{ifSection}}%
renewcommand*{l@subsection}[2]{%
stepcounter{RefSubSection}%
toggletrue{ifSub}%
iftoggle{ifSection}
{togglefalse{ifSection}%
addtolength{leftskip}{TOCleftSkip}%
addtolength{rightskip}{TOCrightSkip}%
noindent}%
{unskipbegingroupupshapesmall textbullet~endgroup}%
begingroup%
upshapesmall#1 hyperlink{numSubSection.theRefSubSection}{textbf{#2}}%
endgroup}%
renewcommand*{l@subsubsection}[2]{%
iftoggle{ifSection}
{togglefalse{ifSection}%
addtolength{leftskip}{TOCleftSkip}%
addtolength{rightskip}{TOCrightSkip}%
noindent}%
{iftoggle{ifSub}
{togglefalse{ifSub}relax%
unskipbegingroupupshapesmall: endgroup}%
{unskipbegingroupitshapesmall, endgroup}}%
begingroupitshapesmall#1endgroup}%
renewcommand*{numberline}[1]{}%
makeatother
% solution ends here, code below is just for the example
begin{document}
% Frontmatter - only unnumbered/unlabeled sections
pagenumbering{roman}
clearpage
tableofcontents
clearpage
section*{Preface}
addcontentsline{toc}{section}{Preface}
clearpage
section*{Another Preface}
addcontentsline{toc}{section}{Another Preface}
% Mainmatter - only numbered/labeled sections
clearpage
addtocontents{toc}{protectvspace{18pt}} % just some separation
pagenumbering{arabic}
%clearpage
section{First}
subsection{Australia}
subsubsection{Alpha}
subsubsection{Beta}
subsubsection{Charlie}
subsubsection{Delta}
subsubsection{Echo}
subsubsection{Foxtrot}
subsection{Brazil}
subsubsection{Golf}
subsubsection{Hotel}
subsubsection{India}
subsection{Canada}
clearpage
section{Second}
clearpage
section{Third}
subsection{Denmark}
subsubsection{Juliet}
subsubsection{Kilo}
subsubsection{Lima}
subsubsection{Mike}
subsubsection{November}
subsection{Egypt}
subsubsection{Oscar}
subsubsection{Papa}
subsubsection{Quebec}
subsubsection{Romeo}
clearpage
section{Fourth}
subsection{Georgia}
subsubsection{Sierra}
subsection{Haiti}
subsubsection{Tango}
subsubsection{Uniform}
subsubsection{Victor}
subsubsection{Whiskey}
subsection{Iceland}
subsection{Japan}
subsubsection{X-ray}
subsubsection{Yankee}
subsubsection{Zulu}
subsubsection{Alpha}
subsubsection{Beta}
subsubsection{Charlie}
subsubsection{Delta}
subsubsection{Echo}
subsection{Kenya}
subsubsection{Foxtrot}
subsection{Laos}
subsubsection{Golf}
subsubsection{Hotel}
subsubsection{India}
subsubsection{Juliet}
subsubsection{Kilo}
% Backmatter - all (sub)sections w/o labels
clearpage
addtocontents{toc}{protectvspace{18pt}} % just some separation
hypersetup{linktoc=page}
section*{References}
addcontentsline{toc}{section}{References}
clearpage
section*{List of Figures}
addcontentsline{toc}{section}{List of Figures}
clearpage
section*{Index}
addcontentsline{toc}{section}{Index}
end{document}
This could most likely be done much easier/prettier, but at least it does the job. Hopefully everything is quite clear ;-)
The code translates to something like this:
add a comment |
My solution goes like this (I actually extended this to include the subsubsections too):
Load
hyperref
w/o ToC links (optionlinktoc=none
) to define them manually. Here I decided that sections should link to whole pages they start on, while subsections link normally.Define custom counter for numberred subsections -- for referencing, in main matter only.
Customize ToC entries for sections with
titletoc
(it's easier).Customize Toc entries for sub- and subsubsections with redefining
l@subsection
andl@subsubsection
respectively, with help of someetoolbox
toggles. I could customize these entries withtitletoc
, but then they would not be justified and therefore look much worse.Finally, switch
hypersetup{linktoc=page}
so that links on pages like List of Figures etc will work normally.
The code:
documentclass[12pt]{article}
usepackage[cp1250]{inputenc}
usepackage{lmodern} % for the looks
usepackage{biolinum} % for the looks
usepackage[T1]{fontenc}
usepackage{etoolbox}
usepackage{titletoc}
usepackage[colorlinks,linktoc=none]{hyperref}
newcounter{numSubSection}
setcounter{numSubSection}{0}
gpreto{subsection}{%
refstepcounter{numSubSection}}%
titlecontents{section}[0pt]%
{addvspace{6pt}sffamilybfseriesnormalsize%
makebox[18pt][r]{%
hyperlink{page.thecontentspage}{textbf{thecontentspage}}%
hspace{6pt}}}%
{makebox[30pt][r]{thecontentslabelhspace{12pt}}}%
{makebox[30pt][r]{null}}%
{}%
makeatletter
newlength{TOCleftSkip}
setlength{TOCleftSkip}{66pt}%
newlength{TOCrightSkip}
setlength{TOCrightSkip}{18pt}%
newtoggle{ifSub}
togglefalse{ifSub}%
newtoggle{ifSection}
toggletrue{ifSection}%
newcounter{RefSubSection}%
setcounter{RefSubSection}{0}%
renewcommand*theRefSubSection{@arabicc@RefSubSection}%
renewcommand*{tableofcontents}{%
section*{contentsname}%
addcontentsline{toc}{section}{contentsname}%
toggletrue{ifSection}%
setcounter{RefSubSection}{0}%
@starttoc{toc}}%
gpreto{l@section}{%
nottoggle{ifSection}
{par%
addtolength{leftskip}{-TOCleftSkip}%
addtolength{rightskip}{-TOCrightSkip}%
togglefalse{ifSub}}{}%
toggletrue{ifSection}}%
renewcommand*{l@subsection}[2]{%
stepcounter{RefSubSection}%
toggletrue{ifSub}%
iftoggle{ifSection}
{togglefalse{ifSection}%
addtolength{leftskip}{TOCleftSkip}%
addtolength{rightskip}{TOCrightSkip}%
noindent}%
{unskipbegingroupupshapesmall textbullet~endgroup}%
begingroup%
upshapesmall#1 hyperlink{numSubSection.theRefSubSection}{textbf{#2}}%
endgroup}%
renewcommand*{l@subsubsection}[2]{%
iftoggle{ifSection}
{togglefalse{ifSection}%
addtolength{leftskip}{TOCleftSkip}%
addtolength{rightskip}{TOCrightSkip}%
noindent}%
{iftoggle{ifSub}
{togglefalse{ifSub}relax%
unskipbegingroupupshapesmall: endgroup}%
{unskipbegingroupitshapesmall, endgroup}}%
begingroupitshapesmall#1endgroup}%
renewcommand*{numberline}[1]{}%
makeatother
% solution ends here, code below is just for the example
begin{document}
% Frontmatter - only unnumbered/unlabeled sections
pagenumbering{roman}
clearpage
tableofcontents
clearpage
section*{Preface}
addcontentsline{toc}{section}{Preface}
clearpage
section*{Another Preface}
addcontentsline{toc}{section}{Another Preface}
% Mainmatter - only numbered/labeled sections
clearpage
addtocontents{toc}{protectvspace{18pt}} % just some separation
pagenumbering{arabic}
%clearpage
section{First}
subsection{Australia}
subsubsection{Alpha}
subsubsection{Beta}
subsubsection{Charlie}
subsubsection{Delta}
subsubsection{Echo}
subsubsection{Foxtrot}
subsection{Brazil}
subsubsection{Golf}
subsubsection{Hotel}
subsubsection{India}
subsection{Canada}
clearpage
section{Second}
clearpage
section{Third}
subsection{Denmark}
subsubsection{Juliet}
subsubsection{Kilo}
subsubsection{Lima}
subsubsection{Mike}
subsubsection{November}
subsection{Egypt}
subsubsection{Oscar}
subsubsection{Papa}
subsubsection{Quebec}
subsubsection{Romeo}
clearpage
section{Fourth}
subsection{Georgia}
subsubsection{Sierra}
subsection{Haiti}
subsubsection{Tango}
subsubsection{Uniform}
subsubsection{Victor}
subsubsection{Whiskey}
subsection{Iceland}
subsection{Japan}
subsubsection{X-ray}
subsubsection{Yankee}
subsubsection{Zulu}
subsubsection{Alpha}
subsubsection{Beta}
subsubsection{Charlie}
subsubsection{Delta}
subsubsection{Echo}
subsection{Kenya}
subsubsection{Foxtrot}
subsection{Laos}
subsubsection{Golf}
subsubsection{Hotel}
subsubsection{India}
subsubsection{Juliet}
subsubsection{Kilo}
% Backmatter - all (sub)sections w/o labels
clearpage
addtocontents{toc}{protectvspace{18pt}} % just some separation
hypersetup{linktoc=page}
section*{References}
addcontentsline{toc}{section}{References}
clearpage
section*{List of Figures}
addcontentsline{toc}{section}{List of Figures}
clearpage
section*{Index}
addcontentsline{toc}{section}{Index}
end{document}
This could most likely be done much easier/prettier, but at least it does the job. Hopefully everything is quite clear ;-)
The code translates to something like this:
add a comment |
My solution goes like this (I actually extended this to include the subsubsections too):
Load
hyperref
w/o ToC links (optionlinktoc=none
) to define them manually. Here I decided that sections should link to whole pages they start on, while subsections link normally.Define custom counter for numberred subsections -- for referencing, in main matter only.
Customize ToC entries for sections with
titletoc
(it's easier).Customize Toc entries for sub- and subsubsections with redefining
l@subsection
andl@subsubsection
respectively, with help of someetoolbox
toggles. I could customize these entries withtitletoc
, but then they would not be justified and therefore look much worse.Finally, switch
hypersetup{linktoc=page}
so that links on pages like List of Figures etc will work normally.
The code:
documentclass[12pt]{article}
usepackage[cp1250]{inputenc}
usepackage{lmodern} % for the looks
usepackage{biolinum} % for the looks
usepackage[T1]{fontenc}
usepackage{etoolbox}
usepackage{titletoc}
usepackage[colorlinks,linktoc=none]{hyperref}
newcounter{numSubSection}
setcounter{numSubSection}{0}
gpreto{subsection}{%
refstepcounter{numSubSection}}%
titlecontents{section}[0pt]%
{addvspace{6pt}sffamilybfseriesnormalsize%
makebox[18pt][r]{%
hyperlink{page.thecontentspage}{textbf{thecontentspage}}%
hspace{6pt}}}%
{makebox[30pt][r]{thecontentslabelhspace{12pt}}}%
{makebox[30pt][r]{null}}%
{}%
makeatletter
newlength{TOCleftSkip}
setlength{TOCleftSkip}{66pt}%
newlength{TOCrightSkip}
setlength{TOCrightSkip}{18pt}%
newtoggle{ifSub}
togglefalse{ifSub}%
newtoggle{ifSection}
toggletrue{ifSection}%
newcounter{RefSubSection}%
setcounter{RefSubSection}{0}%
renewcommand*theRefSubSection{@arabicc@RefSubSection}%
renewcommand*{tableofcontents}{%
section*{contentsname}%
addcontentsline{toc}{section}{contentsname}%
toggletrue{ifSection}%
setcounter{RefSubSection}{0}%
@starttoc{toc}}%
gpreto{l@section}{%
nottoggle{ifSection}
{par%
addtolength{leftskip}{-TOCleftSkip}%
addtolength{rightskip}{-TOCrightSkip}%
togglefalse{ifSub}}{}%
toggletrue{ifSection}}%
renewcommand*{l@subsection}[2]{%
stepcounter{RefSubSection}%
toggletrue{ifSub}%
iftoggle{ifSection}
{togglefalse{ifSection}%
addtolength{leftskip}{TOCleftSkip}%
addtolength{rightskip}{TOCrightSkip}%
noindent}%
{unskipbegingroupupshapesmall textbullet~endgroup}%
begingroup%
upshapesmall#1 hyperlink{numSubSection.theRefSubSection}{textbf{#2}}%
endgroup}%
renewcommand*{l@subsubsection}[2]{%
iftoggle{ifSection}
{togglefalse{ifSection}%
addtolength{leftskip}{TOCleftSkip}%
addtolength{rightskip}{TOCrightSkip}%
noindent}%
{iftoggle{ifSub}
{togglefalse{ifSub}relax%
unskipbegingroupupshapesmall: endgroup}%
{unskipbegingroupitshapesmall, endgroup}}%
begingroupitshapesmall#1endgroup}%
renewcommand*{numberline}[1]{}%
makeatother
% solution ends here, code below is just for the example
begin{document}
% Frontmatter - only unnumbered/unlabeled sections
pagenumbering{roman}
clearpage
tableofcontents
clearpage
section*{Preface}
addcontentsline{toc}{section}{Preface}
clearpage
section*{Another Preface}
addcontentsline{toc}{section}{Another Preface}
% Mainmatter - only numbered/labeled sections
clearpage
addtocontents{toc}{protectvspace{18pt}} % just some separation
pagenumbering{arabic}
%clearpage
section{First}
subsection{Australia}
subsubsection{Alpha}
subsubsection{Beta}
subsubsection{Charlie}
subsubsection{Delta}
subsubsection{Echo}
subsubsection{Foxtrot}
subsection{Brazil}
subsubsection{Golf}
subsubsection{Hotel}
subsubsection{India}
subsection{Canada}
clearpage
section{Second}
clearpage
section{Third}
subsection{Denmark}
subsubsection{Juliet}
subsubsection{Kilo}
subsubsection{Lima}
subsubsection{Mike}
subsubsection{November}
subsection{Egypt}
subsubsection{Oscar}
subsubsection{Papa}
subsubsection{Quebec}
subsubsection{Romeo}
clearpage
section{Fourth}
subsection{Georgia}
subsubsection{Sierra}
subsection{Haiti}
subsubsection{Tango}
subsubsection{Uniform}
subsubsection{Victor}
subsubsection{Whiskey}
subsection{Iceland}
subsection{Japan}
subsubsection{X-ray}
subsubsection{Yankee}
subsubsection{Zulu}
subsubsection{Alpha}
subsubsection{Beta}
subsubsection{Charlie}
subsubsection{Delta}
subsubsection{Echo}
subsection{Kenya}
subsubsection{Foxtrot}
subsection{Laos}
subsubsection{Golf}
subsubsection{Hotel}
subsubsection{India}
subsubsection{Juliet}
subsubsection{Kilo}
% Backmatter - all (sub)sections w/o labels
clearpage
addtocontents{toc}{protectvspace{18pt}} % just some separation
hypersetup{linktoc=page}
section*{References}
addcontentsline{toc}{section}{References}
clearpage
section*{List of Figures}
addcontentsline{toc}{section}{List of Figures}
clearpage
section*{Index}
addcontentsline{toc}{section}{Index}
end{document}
This could most likely be done much easier/prettier, but at least it does the job. Hopefully everything is quite clear ;-)
The code translates to something like this:
My solution goes like this (I actually extended this to include the subsubsections too):
Load
hyperref
w/o ToC links (optionlinktoc=none
) to define them manually. Here I decided that sections should link to whole pages they start on, while subsections link normally.Define custom counter for numberred subsections -- for referencing, in main matter only.
Customize ToC entries for sections with
titletoc
(it's easier).Customize Toc entries for sub- and subsubsections with redefining
l@subsection
andl@subsubsection
respectively, with help of someetoolbox
toggles. I could customize these entries withtitletoc
, but then they would not be justified and therefore look much worse.Finally, switch
hypersetup{linktoc=page}
so that links on pages like List of Figures etc will work normally.
The code:
documentclass[12pt]{article}
usepackage[cp1250]{inputenc}
usepackage{lmodern} % for the looks
usepackage{biolinum} % for the looks
usepackage[T1]{fontenc}
usepackage{etoolbox}
usepackage{titletoc}
usepackage[colorlinks,linktoc=none]{hyperref}
newcounter{numSubSection}
setcounter{numSubSection}{0}
gpreto{subsection}{%
refstepcounter{numSubSection}}%
titlecontents{section}[0pt]%
{addvspace{6pt}sffamilybfseriesnormalsize%
makebox[18pt][r]{%
hyperlink{page.thecontentspage}{textbf{thecontentspage}}%
hspace{6pt}}}%
{makebox[30pt][r]{thecontentslabelhspace{12pt}}}%
{makebox[30pt][r]{null}}%
{}%
makeatletter
newlength{TOCleftSkip}
setlength{TOCleftSkip}{66pt}%
newlength{TOCrightSkip}
setlength{TOCrightSkip}{18pt}%
newtoggle{ifSub}
togglefalse{ifSub}%
newtoggle{ifSection}
toggletrue{ifSection}%
newcounter{RefSubSection}%
setcounter{RefSubSection}{0}%
renewcommand*theRefSubSection{@arabicc@RefSubSection}%
renewcommand*{tableofcontents}{%
section*{contentsname}%
addcontentsline{toc}{section}{contentsname}%
toggletrue{ifSection}%
setcounter{RefSubSection}{0}%
@starttoc{toc}}%
gpreto{l@section}{%
nottoggle{ifSection}
{par%
addtolength{leftskip}{-TOCleftSkip}%
addtolength{rightskip}{-TOCrightSkip}%
togglefalse{ifSub}}{}%
toggletrue{ifSection}}%
renewcommand*{l@subsection}[2]{%
stepcounter{RefSubSection}%
toggletrue{ifSub}%
iftoggle{ifSection}
{togglefalse{ifSection}%
addtolength{leftskip}{TOCleftSkip}%
addtolength{rightskip}{TOCrightSkip}%
noindent}%
{unskipbegingroupupshapesmall textbullet~endgroup}%
begingroup%
upshapesmall#1 hyperlink{numSubSection.theRefSubSection}{textbf{#2}}%
endgroup}%
renewcommand*{l@subsubsection}[2]{%
iftoggle{ifSection}
{togglefalse{ifSection}%
addtolength{leftskip}{TOCleftSkip}%
addtolength{rightskip}{TOCrightSkip}%
noindent}%
{iftoggle{ifSub}
{togglefalse{ifSub}relax%
unskipbegingroupupshapesmall: endgroup}%
{unskipbegingroupitshapesmall, endgroup}}%
begingroupitshapesmall#1endgroup}%
renewcommand*{numberline}[1]{}%
makeatother
% solution ends here, code below is just for the example
begin{document}
% Frontmatter - only unnumbered/unlabeled sections
pagenumbering{roman}
clearpage
tableofcontents
clearpage
section*{Preface}
addcontentsline{toc}{section}{Preface}
clearpage
section*{Another Preface}
addcontentsline{toc}{section}{Another Preface}
% Mainmatter - only numbered/labeled sections
clearpage
addtocontents{toc}{protectvspace{18pt}} % just some separation
pagenumbering{arabic}
%clearpage
section{First}
subsection{Australia}
subsubsection{Alpha}
subsubsection{Beta}
subsubsection{Charlie}
subsubsection{Delta}
subsubsection{Echo}
subsubsection{Foxtrot}
subsection{Brazil}
subsubsection{Golf}
subsubsection{Hotel}
subsubsection{India}
subsection{Canada}
clearpage
section{Second}
clearpage
section{Third}
subsection{Denmark}
subsubsection{Juliet}
subsubsection{Kilo}
subsubsection{Lima}
subsubsection{Mike}
subsubsection{November}
subsection{Egypt}
subsubsection{Oscar}
subsubsection{Papa}
subsubsection{Quebec}
subsubsection{Romeo}
clearpage
section{Fourth}
subsection{Georgia}
subsubsection{Sierra}
subsection{Haiti}
subsubsection{Tango}
subsubsection{Uniform}
subsubsection{Victor}
subsubsection{Whiskey}
subsection{Iceland}
subsection{Japan}
subsubsection{X-ray}
subsubsection{Yankee}
subsubsection{Zulu}
subsubsection{Alpha}
subsubsection{Beta}
subsubsection{Charlie}
subsubsection{Delta}
subsubsection{Echo}
subsection{Kenya}
subsubsection{Foxtrot}
subsection{Laos}
subsubsection{Golf}
subsubsection{Hotel}
subsubsection{India}
subsubsection{Juliet}
subsubsection{Kilo}
% Backmatter - all (sub)sections w/o labels
clearpage
addtocontents{toc}{protectvspace{18pt}} % just some separation
hypersetup{linktoc=page}
section*{References}
addcontentsline{toc}{section}{References}
clearpage
section*{List of Figures}
addcontentsline{toc}{section}{List of Figures}
clearpage
section*{Index}
addcontentsline{toc}{section}{Index}
end{document}
This could most likely be done much easier/prettier, but at least it does the job. Hopefully everything is quite clear ;-)
The code translates to something like this:
answered Mar 13 '14 at 14:30
bartekbartek
1061210
1061210
add a comment |
add a comment |
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f162846%2fhow-to-imitate-great-looking-motion-mountain-toc-including-hyperlinks%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
I did it! :-) Everything works: layout is OK, links are OK. It looks great and wasn't that hard in the end ;-)
– bartek
Mar 10 '14 at 11:55
2
Sorry you haven't gotten much response on this one, but great that you worked it out. Could post an answer showing your solution? That could be helpful for other people seeing this question.
– Torbjørn T.
Mar 10 '14 at 12:41
Sure, I just posted my solution. Looking forward for improvements ;-)
– bartek
Mar 13 '14 at 14:32