using two or more network interface in linux
1
I have two or more network interface at the same time and want to use each network for sending special requests over it.(i want to know how to do that with iptables and other like this )
for example :
I want to see a video by "network-1" and other requests I want to send with "network-2"
ifconfig
output:
enx0c5b8f279a64: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255
inet6 fe80::af19:e5c2:350e:ad09 prefixlen 64 scopeid 0x20<link>
ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)
RX packets 74 bytes 16183 (16.1 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 122 bytes 16282 (16.2 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 5290686 bytes 3859055101 (3.8 GB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5290686 bytes 3859055101 (3.8 GB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1400
inet 81.31.179.204 netmask 255.255.255.255 destination 172.17.1.230
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 292544 bytes 336720863 (336.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 178723 bytes 16928573 (16.9 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::a71b:2220:7e40:1948 prefixlen 64 scopeid 0x20<link>
ether e4:70:b8:cf:4f:81 txqueuelen 1000 (Ethernet)
RX packets 4691632 bytes 4626078058 (4.6 GB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4675065 bytes 704065262 (704.0 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
and my IP route is
ip route show
output:
default dev ppp0 proto static scope link metric 50
default via 192.168.8.1 dev enx0c5b8f279a64 proto dhcp metric 20100
default via 192.168.1.1 dev wlp2s0 proto dhcp metric 20600
169.254.0.0/16 dev wlp2s0 scope link metric 1000
172.17.1.230 via 192.168.1.1 dev wlp2s0 src 192.168.1.2
172.17.1.230 dev ppp0 proto kernel scope link src 81.31.179.204 metric 50
172.17.1.230 via 192.168.1.1 dev wlp2s0 proto static metric 600
192.168.1.0/24 dev wlp2s0 proto kernel scope link src 192.168.1.2 metric 600
192.168.1.1 dev wlp2s0 proto static scope link metric 600
192.168.8.0/24 dev enx0c5b8f279a64 proto kernel scope link src
192.168.8.100 metric 100
at that time wlp2s0 and enx0c5b8f279a64 are my two network interface
I want to send some of my requests through enx0c5b8f279a64 (that will be specified by setting browser on a proxy over it) and other requests i want to send through wlp2s0.
linux networking network-interface
edited 3 hours ago
Rui F Ribeiro
39.6k1479132
asked Jan 13 at 20:10
mohammadreza salehimohammadreza salehi
64
add a comment |
1
I have two or more network interface at the same time and want to use each network for sending special requests over it.(i want to know how to do that with iptables and other like this )
for example :
I want to see a video by "network-1" and other requests I want to send with "network-2"
ifconfig
output:
enx0c5b8f279a64: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255
inet6 fe80::af19:e5c2:350e:ad09 prefixlen 64 scopeid 0x20<link>
ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)
RX packets 74 bytes 16183 (16.1 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 122 bytes 16282 (16.2 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 5290686 bytes 3859055101 (3.8 GB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5290686 bytes 3859055101 (3.8 GB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1400
inet 81.31.179.204 netmask 255.255.255.255 destination 172.17.1.230
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 292544 bytes 336720863 (336.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 178723 bytes 16928573 (16.9 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::a71b:2220:7e40:1948 prefixlen 64 scopeid 0x20<link>
ether e4:70:b8:cf:4f:81 txqueuelen 1000 (Ethernet)
RX packets 4691632 bytes 4626078058 (4.6 GB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4675065 bytes 704065262 (704.0 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
and my IP route is
ip route show
output:
default dev ppp0 proto static scope link metric 50
default via 192.168.8.1 dev enx0c5b8f279a64 proto dhcp metric 20100
default via 192.168.1.1 dev wlp2s0 proto dhcp metric 20600
169.254.0.0/16 dev wlp2s0 scope link metric 1000
172.17.1.230 via 192.168.1.1 dev wlp2s0 src 192.168.1.2
172.17.1.230 dev ppp0 proto kernel scope link src 81.31.179.204 metric 50
172.17.1.230 via 192.168.1.1 dev wlp2s0 proto static metric 600
192.168.1.0/24 dev wlp2s0 proto kernel scope link src 192.168.1.2 metric 600
192.168.1.1 dev wlp2s0 proto static scope link metric 600
192.168.8.0/24 dev enx0c5b8f279a64 proto kernel scope link src
192.168.8.100 metric 100
at that time wlp2s0 and enx0c5b8f279a64 are my two network interface
I want to send some of my requests through enx0c5b8f279a64 (that will be specified by setting browser on a proxy over it) and other requests i want to send through wlp2s0.
linux networking network-interface
edited 3 hours ago
Rui F Ribeiro
39.6k1479132
asked Jan 13 at 20:10
mohammadreza salehimohammadreza salehi
64
add a comment |
1
1
1
1
I have two or more network interface at the same time and want to use each network for sending special requests over it.(i want to know how to do that with iptables and other like this )
for example :
I want to see a video by "network-1" and other requests I want to send with "network-2"
ifconfig
output:
enx0c5b8f279a64: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255
inet6 fe80::af19:e5c2:350e:ad09 prefixlen 64 scopeid 0x20<link>
ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)
RX packets 74 bytes 16183 (16.1 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 122 bytes 16282 (16.2 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 5290686 bytes 3859055101 (3.8 GB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5290686 bytes 3859055101 (3.8 GB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1400
inet 81.31.179.204 netmask 255.255.255.255 destination 172.17.1.230
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 292544 bytes 336720863 (336.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 178723 bytes 16928573 (16.9 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::a71b:2220:7e40:1948 prefixlen 64 scopeid 0x20<link>
ether e4:70:b8:cf:4f:81 txqueuelen 1000 (Ethernet)
RX packets 4691632 bytes 4626078058 (4.6 GB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4675065 bytes 704065262 (704.0 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
and my IP route is
ip route show
output:
default dev ppp0 proto static scope link metric 50
default via 192.168.8.1 dev enx0c5b8f279a64 proto dhcp metric 20100
default via 192.168.1.1 dev wlp2s0 proto dhcp metric 20600
169.254.0.0/16 dev wlp2s0 scope link metric 1000
172.17.1.230 via 192.168.1.1 dev wlp2s0 src 192.168.1.2
172.17.1.230 dev ppp0 proto kernel scope link src 81.31.179.204 metric 50
172.17.1.230 via 192.168.1.1 dev wlp2s0 proto static metric 600
192.168.1.0/24 dev wlp2s0 proto kernel scope link src 192.168.1.2 metric 600
192.168.1.1 dev wlp2s0 proto static scope link metric 600
192.168.8.0/24 dev enx0c5b8f279a64 proto kernel scope link src
192.168.8.100 metric 100
at that time wlp2s0 and enx0c5b8f279a64 are my two network interface
I want to send some of my requests through enx0c5b8f279a64 (that will be specified by setting browser on a proxy over it) and other requests i want to send through wlp2s0.
linux networking network-interface
edited 3 hours ago
Rui F Ribeiro
39.6k1479132
asked Jan 13 at 20:10
mohammadreza salehimohammadreza salehi
64
I have two or more network interface at the same time and want to use each network for sending special requests over it.(i want to know how to do that with iptables and other like this )
for example :
I want to see a video by "network-1" and other requests I want to send with "network-2"
ifconfig
output:
enx0c5b8f279a64: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255
inet6 fe80::af19:e5c2:350e:ad09 prefixlen 64 scopeid 0x20<link>
ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)
RX packets 74 bytes 16183 (16.1 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 122 bytes 16282 (16.2 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 5290686 bytes 3859055101 (3.8 GB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5290686 bytes 3859055101 (3.8 GB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1400
inet 81.31.179.204 netmask 255.255.255.255 destination 172.17.1.230
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 292544 bytes 336720863 (336.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 178723 bytes 16928573 (16.9 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::a71b:2220:7e40:1948 prefixlen 64 scopeid 0x20<link>
ether e4:70:b8:cf:4f:81 txqueuelen 1000 (Ethernet)
RX packets 4691632 bytes 4626078058 (4.6 GB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4675065 bytes 704065262 (704.0 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
and my IP route is
ip route show
output:
default dev ppp0 proto static scope link metric 50
default via 192.168.8.1 dev enx0c5b8f279a64 proto dhcp metric 20100
default via 192.168.1.1 dev wlp2s0 proto dhcp metric 20600
169.254.0.0/16 dev wlp2s0 scope link metric 1000
172.17.1.230 via 192.168.1.1 dev wlp2s0 src 192.168.1.2
172.17.1.230 dev ppp0 proto kernel scope link src 81.31.179.204 metric 50
172.17.1.230 via 192.168.1.1 dev wlp2s0 proto static metric 600
192.168.1.0/24 dev wlp2s0 proto kernel scope link src 192.168.1.2 metric 600
192.168.1.1 dev wlp2s0 proto static scope link metric 600
192.168.8.0/24 dev enx0c5b8f279a64 proto kernel scope link src
192.168.8.100 metric 100
at that time wlp2s0 and enx0c5b8f279a64 are my two network interface
I want to send some of my requests through enx0c5b8f279a64 (that will be specified by setting browser on a proxy over it) and other requests i want to send through wlp2s0.
linux networking network-interface
linux networking network-interface
edited 3 hours ago
Rui F Ribeiro
39.6k1479132
asked Jan 13 at 20:10
mohammadreza salehimohammadreza salehi
64
edited 3 hours ago
Rui F Ribeiro
39.6k1479132
asked Jan 13 at 20:10
mohammadreza salehimohammadreza salehi
64
edited 3 hours ago
Rui F Ribeiro
39.6k1479132
edited 3 hours ago
Rui F Ribeiro
39.6k1479132
edited 3 hours ago
Rui F Ribeiro
39.6k1479132
39.6k1479132
asked Jan 13 at 20:10
mohammadreza salehimohammadreza salehi
64
asked Jan 13 at 20:10
mohammadreza salehimohammadreza salehi
64
asked Jan 13 at 20:10
mohammadreza salehimohammadreza salehi
64
64
add a comment |
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f494298%2fusing-two-or-more-network-interface-in-linux%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
draft saved
draft discarded
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f494298%2fusing-two-or-more-network-interface-in-linux%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
