Debian Buster GUI freezes up with Nvidia graphics












1















I recently built a new system, and my graphics are having... problems. The GUI will freeze up frequently and for minutes at a time. I'm running the proprietary drivers, and didn't have this problem with nouveau, but nouveau also didn't recognize my GPU or let me set up my second monitor.



Running dmesg | grep NVRM yields



[    3.909853] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.66  Mon May  1 15:29:16 PDT 2017 (using threaded interrupts)
[ 350.982860] NVRM: GPU at PCI:0000:09:00: GPU-7276b506-d343-19d6-901c-e9b2d011f0b4
[ 350.982868] NVRM: GPU Board Serial Number:
[ 350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000
[ 355.100050] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000028 intr 00040000
[ 409.548334] NVRM: Xid (PCI:0000:09:00): 31, Ch 00000028, engmask 00000101, intr 10000000
[ 413.293746] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000028 intr 00040000
[ 4082.537408] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000


but these Xid errors don't mean a whole lot to me.



xrandr gives



Screen 0: minimum 8 x 8, current 2806 x 900, maximum 32767 x 32767
DVI-D-0 connected primary 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 256mm
1440x900 59.89*+
1280x800 59.81
1280x720 60.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
HDMI-0 connected 1366x768+1440+132 (normal left inverted right x axis y axis) 410mm x 230mm
1366x768 59.86*+
1920x1080 59.94
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 59.94
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x480 59.94
640x480 75.00 72.81 59.94 59.93
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)


I have a GeForce GTX 1050 Ti. Any ideas on what I might try?










share|improve this question














bumped to the homepage by Community 5 hours ago


This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.




















    1















    I recently built a new system, and my graphics are having... problems. The GUI will freeze up frequently and for minutes at a time. I'm running the proprietary drivers, and didn't have this problem with nouveau, but nouveau also didn't recognize my GPU or let me set up my second monitor.



    Running dmesg | grep NVRM yields



    [    3.909853] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.66  Mon May  1 15:29:16 PDT 2017 (using threaded interrupts)
    [ 350.982860] NVRM: GPU at PCI:0000:09:00: GPU-7276b506-d343-19d6-901c-e9b2d011f0b4
    [ 350.982868] NVRM: GPU Board Serial Number:
    [ 350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000
    [ 355.100050] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000028 intr 00040000
    [ 409.548334] NVRM: Xid (PCI:0000:09:00): 31, Ch 00000028, engmask 00000101, intr 10000000
    [ 413.293746] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000028 intr 00040000
    [ 4082.537408] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000


    but these Xid errors don't mean a whole lot to me.



    xrandr gives



    Screen 0: minimum 8 x 8, current 2806 x 900, maximum 32767 x 32767
    DVI-D-0 connected primary 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 256mm
    1440x900 59.89*+
    1280x800 59.81
    1280x720 60.00
    1152x864 75.00
    1024x768 75.03 70.07 60.00
    800x600 75.00 72.19 60.32 56.25
    640x480 75.00 72.81 59.94
    HDMI-0 connected 1366x768+1440+132 (normal left inverted right x axis y axis) 410mm x 230mm
    1366x768 59.86*+
    1920x1080 59.94
    1280x1024 75.02 60.02
    1280x960 60.00
    1280x800 59.81
    1280x720 60.00 59.94
    1152x864 75.00
    1024x768 75.03 70.07 60.00
    800x600 75.00 72.19 60.32 56.25
    720x480 59.94
    640x480 75.00 72.81 59.94 59.93
    DP-0 disconnected (normal left inverted right x axis y axis)
    DP-1 disconnected (normal left inverted right x axis y axis)


    I have a GeForce GTX 1050 Ti. Any ideas on what I might try?










    share|improve this question














    bumped to the homepage by Community 5 hours ago


    This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.


















      1












      1








      1








      I recently built a new system, and my graphics are having... problems. The GUI will freeze up frequently and for minutes at a time. I'm running the proprietary drivers, and didn't have this problem with nouveau, but nouveau also didn't recognize my GPU or let me set up my second monitor.



      Running dmesg | grep NVRM yields



      [    3.909853] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.66  Mon May  1 15:29:16 PDT 2017 (using threaded interrupts)
      [ 350.982860] NVRM: GPU at PCI:0000:09:00: GPU-7276b506-d343-19d6-901c-e9b2d011f0b4
      [ 350.982868] NVRM: GPU Board Serial Number:
      [ 350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000
      [ 355.100050] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000028 intr 00040000
      [ 409.548334] NVRM: Xid (PCI:0000:09:00): 31, Ch 00000028, engmask 00000101, intr 10000000
      [ 413.293746] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000028 intr 00040000
      [ 4082.537408] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000


      but these Xid errors don't mean a whole lot to me.



      xrandr gives



      Screen 0: minimum 8 x 8, current 2806 x 900, maximum 32767 x 32767
      DVI-D-0 connected primary 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 256mm
      1440x900 59.89*+
      1280x800 59.81
      1280x720 60.00
      1152x864 75.00
      1024x768 75.03 70.07 60.00
      800x600 75.00 72.19 60.32 56.25
      640x480 75.00 72.81 59.94
      HDMI-0 connected 1366x768+1440+132 (normal left inverted right x axis y axis) 410mm x 230mm
      1366x768 59.86*+
      1920x1080 59.94
      1280x1024 75.02 60.02
      1280x960 60.00
      1280x800 59.81
      1280x720 60.00 59.94
      1152x864 75.00
      1024x768 75.03 70.07 60.00
      800x600 75.00 72.19 60.32 56.25
      720x480 59.94
      640x480 75.00 72.81 59.94 59.93
      DP-0 disconnected (normal left inverted right x axis y axis)
      DP-1 disconnected (normal left inverted right x axis y axis)


      I have a GeForce GTX 1050 Ti. Any ideas on what I might try?










      share|improve this question














      I recently built a new system, and my graphics are having... problems. The GUI will freeze up frequently and for minutes at a time. I'm running the proprietary drivers, and didn't have this problem with nouveau, but nouveau also didn't recognize my GPU or let me set up my second monitor.



      Running dmesg | grep NVRM yields



      [    3.909853] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.66  Mon May  1 15:29:16 PDT 2017 (using threaded interrupts)
      [ 350.982860] NVRM: GPU at PCI:0000:09:00: GPU-7276b506-d343-19d6-901c-e9b2d011f0b4
      [ 350.982868] NVRM: GPU Board Serial Number:
      [ 350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000
      [ 355.100050] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000028 intr 00040000
      [ 409.548334] NVRM: Xid (PCI:0000:09:00): 31, Ch 00000028, engmask 00000101, intr 10000000
      [ 413.293746] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000028 intr 00040000
      [ 4082.537408] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000


      but these Xid errors don't mean a whole lot to me.



      xrandr gives



      Screen 0: minimum 8 x 8, current 2806 x 900, maximum 32767 x 32767
      DVI-D-0 connected primary 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 256mm
      1440x900 59.89*+
      1280x800 59.81
      1280x720 60.00
      1152x864 75.00
      1024x768 75.03 70.07 60.00
      800x600 75.00 72.19 60.32 56.25
      640x480 75.00 72.81 59.94
      HDMI-0 connected 1366x768+1440+132 (normal left inverted right x axis y axis) 410mm x 230mm
      1366x768 59.86*+
      1920x1080 59.94
      1280x1024 75.02 60.02
      1280x960 60.00
      1280x800 59.81
      1280x720 60.00 59.94
      1152x864 75.00
      1024x768 75.03 70.07 60.00
      800x600 75.00 72.19 60.32 56.25
      720x480 59.94
      640x480 75.00 72.81 59.94 59.93
      DP-0 disconnected (normal left inverted right x axis y axis)
      DP-1 disconnected (normal left inverted right x axis y axis)


      I have a GeForce GTX 1050 Ti. Any ideas on what I might try?







      debian x11 nvidia






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked Jul 1 '17 at 0:01









      saninesanine

      62




      62





      bumped to the homepage by Community 5 hours ago


      This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.







      bumped to the homepage by Community 5 hours ago


      This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
























          2 Answers
          2






          active

          oldest

          votes


















          0














          I can't add comments yet, so have to ask here. How did you install the proprietary drivers? I've done it a number of times on my systems, and keep forgetting the exact steps, but I just run the one-file download from nvidia from the shell, and it guides me (generally run from terminal with root - without X). It's important that it compiles necessary libs with your current kernel libs.



          Also, did you check /usr/bin/nvidia-settings ? (just to do a general check on settings, I guess).



          What about the Xorg.0.log? It should give more details on errors than dmesg.






          share|improve this answer


























          • I installed it from the Debian repos, as per this guide (though using the Buster repos rather than the Jessie ones). I can open nvidia-settings, but I don't see anything in particular that seems unusual - what should I be looking for?

            – sanine
            Jul 1 '17 at 1:33













          • You can consider downloading a driver from nvidia and running their installer. They are pretty good.

            – MattAPiroglu
            Jul 1 '17 at 1:42











          • I haven't had luck with those in the past, but I'll give it a shot!

            – sanine
            Jul 1 '17 at 1:48











          • It seems I have the same driver as the current version distributed by nvidia.

            – sanine
            Jul 1 '17 at 2:01











          • My Xorg.0.log here

            – sanine
            Jul 1 '17 at 2:06



















          0














          Quoting NVIDIA's XID Errors page:




          The Xid message is an error report from the NVIDIA driver that is printed to the operating system's kernel log or event log. Xid messages indicate that a general GPU error occurred, most often due to the driver programming the GPU incorrectly or to corruption of the commands sent to the GPU. The messages can be indicative of a hardware problem, an NVIDIA software problem, or a user application problem.




          [  350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000


          PCI:0000:09:00 is the device ID, and 32 is XID error id, in this case:




          Invalid or corrupted push buffer stream







          1. You can try reinstalling all nvidia packages (apt purge nvidia.) Debian provides.

          2. If that does not help, then try the newest drivers from NVIDIA.






          share|improve this answer























            Your Answer








            StackExchange.ready(function() {
            var channelOptions = {
            tags: "".split(" "),
            id: "106"
            };
            initTagRenderer("".split(" "), "".split(" "), channelOptions);

            StackExchange.using("externalEditor", function() {
            // Have to fire editor after snippets, if snippets enabled
            if (StackExchange.settings.snippets.snippetsEnabled) {
            StackExchange.using("snippets", function() {
            createEditor();
            });
            }
            else {
            createEditor();
            }
            });

            function createEditor() {
            StackExchange.prepareEditor({
            heartbeatType: 'answer',
            autoActivateHeartbeat: false,
            convertImagesToLinks: false,
            noModals: true,
            showLowRepImageUploadWarning: true,
            reputationToPostImages: null,
            bindNavPrevention: true,
            postfix: "",
            imageUploader: {
            brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
            contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
            allowUrls: true
            },
            onDemand: true,
            discardSelector: ".discard-answer"
            ,immediatelyShowMarkdownHelp:true
            });


            }
            });














            draft saved

            draft discarded


















            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f374545%2fdebian-buster-gui-freezes-up-with-nvidia-graphics%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown

























            2 Answers
            2






            active

            oldest

            votes








            2 Answers
            2






            active

            oldest

            votes









            active

            oldest

            votes






            active

            oldest

            votes









            0














            I can't add comments yet, so have to ask here. How did you install the proprietary drivers? I've done it a number of times on my systems, and keep forgetting the exact steps, but I just run the one-file download from nvidia from the shell, and it guides me (generally run from terminal with root - without X). It's important that it compiles necessary libs with your current kernel libs.



            Also, did you check /usr/bin/nvidia-settings ? (just to do a general check on settings, I guess).



            What about the Xorg.0.log? It should give more details on errors than dmesg.






            share|improve this answer


























            • I installed it from the Debian repos, as per this guide (though using the Buster repos rather than the Jessie ones). I can open nvidia-settings, but I don't see anything in particular that seems unusual - what should I be looking for?

              – sanine
              Jul 1 '17 at 1:33













            • You can consider downloading a driver from nvidia and running their installer. They are pretty good.

              – MattAPiroglu
              Jul 1 '17 at 1:42











            • I haven't had luck with those in the past, but I'll give it a shot!

              – sanine
              Jul 1 '17 at 1:48











            • It seems I have the same driver as the current version distributed by nvidia.

              – sanine
              Jul 1 '17 at 2:01











            • My Xorg.0.log here

              – sanine
              Jul 1 '17 at 2:06
















            0














            I can't add comments yet, so have to ask here. How did you install the proprietary drivers? I've done it a number of times on my systems, and keep forgetting the exact steps, but I just run the one-file download from nvidia from the shell, and it guides me (generally run from terminal with root - without X). It's important that it compiles necessary libs with your current kernel libs.



            Also, did you check /usr/bin/nvidia-settings ? (just to do a general check on settings, I guess).



            What about the Xorg.0.log? It should give more details on errors than dmesg.






            share|improve this answer


























            • I installed it from the Debian repos, as per this guide (though using the Buster repos rather than the Jessie ones). I can open nvidia-settings, but I don't see anything in particular that seems unusual - what should I be looking for?

              – sanine
              Jul 1 '17 at 1:33













            • You can consider downloading a driver from nvidia and running their installer. They are pretty good.

              – MattAPiroglu
              Jul 1 '17 at 1:42











            • I haven't had luck with those in the past, but I'll give it a shot!

              – sanine
              Jul 1 '17 at 1:48











            • It seems I have the same driver as the current version distributed by nvidia.

              – sanine
              Jul 1 '17 at 2:01











            • My Xorg.0.log here

              – sanine
              Jul 1 '17 at 2:06














            0












            0








            0







            I can't add comments yet, so have to ask here. How did you install the proprietary drivers? I've done it a number of times on my systems, and keep forgetting the exact steps, but I just run the one-file download from nvidia from the shell, and it guides me (generally run from terminal with root - without X). It's important that it compiles necessary libs with your current kernel libs.



            Also, did you check /usr/bin/nvidia-settings ? (just to do a general check on settings, I guess).



            What about the Xorg.0.log? It should give more details on errors than dmesg.






            share|improve this answer















            I can't add comments yet, so have to ask here. How did you install the proprietary drivers? I've done it a number of times on my systems, and keep forgetting the exact steps, but I just run the one-file download from nvidia from the shell, and it guides me (generally run from terminal with root - without X). It's important that it compiles necessary libs with your current kernel libs.



            Also, did you check /usr/bin/nvidia-settings ? (just to do a general check on settings, I guess).



            What about the Xorg.0.log? It should give more details on errors than dmesg.







            share|improve this answer














            share|improve this answer



            share|improve this answer








            edited Jul 1 '17 at 1:37

























            answered Jul 1 '17 at 1:21









            MattAPirogluMattAPiroglu

            1114




            1114













            • I installed it from the Debian repos, as per this guide (though using the Buster repos rather than the Jessie ones). I can open nvidia-settings, but I don't see anything in particular that seems unusual - what should I be looking for?

              – sanine
              Jul 1 '17 at 1:33













            • You can consider downloading a driver from nvidia and running their installer. They are pretty good.

              – MattAPiroglu
              Jul 1 '17 at 1:42











            • I haven't had luck with those in the past, but I'll give it a shot!

              – sanine
              Jul 1 '17 at 1:48











            • It seems I have the same driver as the current version distributed by nvidia.

              – sanine
              Jul 1 '17 at 2:01











            • My Xorg.0.log here

              – sanine
              Jul 1 '17 at 2:06



















            • I installed it from the Debian repos, as per this guide (though using the Buster repos rather than the Jessie ones). I can open nvidia-settings, but I don't see anything in particular that seems unusual - what should I be looking for?

              – sanine
              Jul 1 '17 at 1:33













            • You can consider downloading a driver from nvidia and running their installer. They are pretty good.

              – MattAPiroglu
              Jul 1 '17 at 1:42











            • I haven't had luck with those in the past, but I'll give it a shot!

              – sanine
              Jul 1 '17 at 1:48











            • It seems I have the same driver as the current version distributed by nvidia.

              – sanine
              Jul 1 '17 at 2:01











            • My Xorg.0.log here

              – sanine
              Jul 1 '17 at 2:06

















            I installed it from the Debian repos, as per this guide (though using the Buster repos rather than the Jessie ones). I can open nvidia-settings, but I don't see anything in particular that seems unusual - what should I be looking for?

            – sanine
            Jul 1 '17 at 1:33







            I installed it from the Debian repos, as per this guide (though using the Buster repos rather than the Jessie ones). I can open nvidia-settings, but I don't see anything in particular that seems unusual - what should I be looking for?

            – sanine
            Jul 1 '17 at 1:33















            You can consider downloading a driver from nvidia and running their installer. They are pretty good.

            – MattAPiroglu
            Jul 1 '17 at 1:42





            You can consider downloading a driver from nvidia and running their installer. They are pretty good.

            – MattAPiroglu
            Jul 1 '17 at 1:42













            I haven't had luck with those in the past, but I'll give it a shot!

            – sanine
            Jul 1 '17 at 1:48





            I haven't had luck with those in the past, but I'll give it a shot!

            – sanine
            Jul 1 '17 at 1:48













            It seems I have the same driver as the current version distributed by nvidia.

            – sanine
            Jul 1 '17 at 2:01





            It seems I have the same driver as the current version distributed by nvidia.

            – sanine
            Jul 1 '17 at 2:01













            My Xorg.0.log here

            – sanine
            Jul 1 '17 at 2:06





            My Xorg.0.log here

            – sanine
            Jul 1 '17 at 2:06













            0














            Quoting NVIDIA's XID Errors page:




            The Xid message is an error report from the NVIDIA driver that is printed to the operating system's kernel log or event log. Xid messages indicate that a general GPU error occurred, most often due to the driver programming the GPU incorrectly or to corruption of the commands sent to the GPU. The messages can be indicative of a hardware problem, an NVIDIA software problem, or a user application problem.




            [  350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000


            PCI:0000:09:00 is the device ID, and 32 is XID error id, in this case:




            Invalid or corrupted push buffer stream







            1. You can try reinstalling all nvidia packages (apt purge nvidia.) Debian provides.

            2. If that does not help, then try the newest drivers from NVIDIA.






            share|improve this answer




























              0














              Quoting NVIDIA's XID Errors page:




              The Xid message is an error report from the NVIDIA driver that is printed to the operating system's kernel log or event log. Xid messages indicate that a general GPU error occurred, most often due to the driver programming the GPU incorrectly or to corruption of the commands sent to the GPU. The messages can be indicative of a hardware problem, an NVIDIA software problem, or a user application problem.




              [  350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000


              PCI:0000:09:00 is the device ID, and 32 is XID error id, in this case:




              Invalid or corrupted push buffer stream







              1. You can try reinstalling all nvidia packages (apt purge nvidia.) Debian provides.

              2. If that does not help, then try the newest drivers from NVIDIA.






              share|improve this answer


























                0












                0








                0







                Quoting NVIDIA's XID Errors page:




                The Xid message is an error report from the NVIDIA driver that is printed to the operating system's kernel log or event log. Xid messages indicate that a general GPU error occurred, most often due to the driver programming the GPU incorrectly or to corruption of the commands sent to the GPU. The messages can be indicative of a hardware problem, an NVIDIA software problem, or a user application problem.




                [  350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000


                PCI:0000:09:00 is the device ID, and 32 is XID error id, in this case:




                Invalid or corrupted push buffer stream







                1. You can try reinstalling all nvidia packages (apt purge nvidia.) Debian provides.

                2. If that does not help, then try the newest drivers from NVIDIA.






                share|improve this answer













                Quoting NVIDIA's XID Errors page:




                The Xid message is an error report from the NVIDIA driver that is printed to the operating system's kernel log or event log. Xid messages indicate that a general GPU error occurred, most often due to the driver programming the GPU incorrectly or to corruption of the commands sent to the GPU. The messages can be indicative of a hardware problem, an NVIDIA software problem, or a user application problem.




                [  350.982873] NVRM: Xid (PCI:0000:09:00): 32, Channel ID 00000020 intr 00040000


                PCI:0000:09:00 is the device ID, and 32 is XID error id, in this case:




                Invalid or corrupted push buffer stream







                1. You can try reinstalling all nvidia packages (apt purge nvidia.) Debian provides.

                2. If that does not help, then try the newest drivers from NVIDIA.







                share|improve this answer












                share|improve this answer



                share|improve this answer










                answered Nov 26 '17 at 6:37









                user1338062user1338062

                31325




                31325






























                    draft saved

                    draft discarded




















































                    Thanks for contributing an answer to Unix & Linux Stack Exchange!


                    • Please be sure to answer the question. Provide details and share your research!

                    But avoid



                    • Asking for help, clarification, or responding to other answers.

                    • Making statements based on opinion; back them up with references or personal experience.


                    To learn more, see our tips on writing great answers.




                    draft saved


                    draft discarded














                    StackExchange.ready(
                    function () {
                    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f374545%2fdebian-buster-gui-freezes-up-with-nvidia-graphics%23new-answer', 'question_page');
                    }
                    );

                    Post as a guest















                    Required, but never shown





















































                    Required, but never shown














                    Required, but never shown












                    Required, but never shown







                    Required, but never shown

































                    Required, but never shown














                    Required, but never shown












                    Required, but never shown







                    Required, but never shown







                    Popular posts from this blog

                    Accessing regular linux commands in Huawei's Dopra Linux

                    Can't connect RFCOMM socket: Host is down

                    Kernel panic - not syncing: Fatal Exception in Interrupt