United Nations Security Council(英語) Conseil de sécurité des Nations unies(フランス語) Совет Безопасности Организации Объединённых Наций(ロシア語) 联合国安全理事会(中国語) Consejo de Seguridad de las Naciones Unidas(スペイン語) مجلس أمن الأمم المتحد(アラビア語)
国際連合安全保障理事会会議場
概要
主要機関
略称
UNSC
状況
活動中
活動開始
1946年
本部
国際連合本部ビル (米国・ニューヨーク)
公式サイト
UNSC
United Nations Security Council Portal:国際連合
テンプレートを表示
国際連合安全保障理事会(こくさいれんごうあんぜんほしょうりじかい、英: United Nations Security Council)は、国際連合の主要機関の一つ。安全保障理事会は、実質的に国際連合の中で最も大きな権限を持っており、事実上の最高意思決定機関である。国連主要機関の中で法的に国際連合加盟国を拘束する権限がある数少ない機関でもある。その目的や権限は、国際連合憲章に定められていて世界の平和と安全の維持に対して重大な責任を持つことが規定されている。略して安全保障理事会または安保理(あんぽり)ともいわれている。
4
I have a device with two interfaces, eth0 and eth1. One should get its IP from a DHCP server and the other should get its IP statically. If my /etc/network/interfaces file is configured as follows: auto lo iface lo inet loopback auto eth1 iface eth1 inet dhcp iface eth1 inet6 auto auto eth0 iface eth0 inet static address 10.10.10.10 netmask 255.255.255.0 Everything works great, eth1 gets its IP from the DHCP server, eth0 sets its IP statically from the information given, but if I try to change the order in the file, such as auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.10 netmask 255.255.255.0 auto eth1 iface eth1 inet dhcp iface eth1 inet6 auto In this case, eth1 fails to get an IP. Does the /etc/network/interface care about th...
0
I have a Multi-Boot-System with 4 different installations of Linux. (1 Manjaro, 3 Mint) spread over 2 hard drives (2 on each). After doing grub-install /dev/sdX and update-grub several times within each installation ... the Grub-menu needs more and more time to open. It started with a few more seconds, now it takes several minutes. I tried to purge and reinstall Grub but this made the problem even worse: apt-get purge grub grub-pc grub-common apt-get install grub-common grub-pc os-prober update-grub What could be causing this problem?
linux grub2 multiboot
share | improve this question
edited 4 mins ago
...