What's a good way to classify railguns?












1














Most weapons and artillery are split by bore diameter, e.g. naval rifles of 203mm, 406mm etc.



Railguns and coilguns probably won't be classified the same way, I think. Cause if multiple models use a 25mm slug or what have you, but they perform differently, what's a good way to separate them?



Muzzle velocity? Like a 2km/s railgun versus a 5km/s one? Or input energy? That then puts forth what's a "realistic" number to power a railgun? Output energy/impact energy have the same problem.










share|improve this question






















  • I think velocity such as mach 10 etc
    – user6760
    1 hour ago
















1














Most weapons and artillery are split by bore diameter, e.g. naval rifles of 203mm, 406mm etc.



Railguns and coilguns probably won't be classified the same way, I think. Cause if multiple models use a 25mm slug or what have you, but they perform differently, what's a good way to separate them?



Muzzle velocity? Like a 2km/s railgun versus a 5km/s one? Or input energy? That then puts forth what's a "realistic" number to power a railgun? Output energy/impact energy have the same problem.










share|improve this question






















  • I think velocity such as mach 10 etc
    – user6760
    1 hour ago














1












1








1







Most weapons and artillery are split by bore diameter, e.g. naval rifles of 203mm, 406mm etc.



Railguns and coilguns probably won't be classified the same way, I think. Cause if multiple models use a 25mm slug or what have you, but they perform differently, what's a good way to separate them?



Muzzle velocity? Like a 2km/s railgun versus a 5km/s one? Or input energy? That then puts forth what's a "realistic" number to power a railgun? Output energy/impact energy have the same problem.










share|improve this question













Most weapons and artillery are split by bore diameter, e.g. naval rifles of 203mm, 406mm etc.



Railguns and coilguns probably won't be classified the same way, I think. Cause if multiple models use a 25mm slug or what have you, but they perform differently, what's a good way to separate them?



Muzzle velocity? Like a 2km/s railgun versus a 5km/s one? Or input energy? That then puts forth what's a "realistic" number to power a railgun? Output energy/impact energy have the same problem.







weapons energy railguns






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked 2 hours ago









armorhide406

1288




1288












  • I think velocity such as mach 10 etc
    – user6760
    1 hour ago


















  • I think velocity such as mach 10 etc
    – user6760
    1 hour ago
















I think velocity such as mach 10 etc
– user6760
1 hour ago




I think velocity such as mach 10 etc
– user6760
1 hour ago










3 Answers
3






active

oldest

votes


















2














Gauss




The gauss, abbreviated as G or Gs, is the cgs unit of measurement of magnetic flux density (or "magnetic induction") (B). It is named after German mathematician and physicist Carl Friedrich Gauss.1[2] One gauss is defined as one maxwell per square centimeter. The cgs system has been superseded by the International System of Units (SI), which uses the tesla (symbol T) as the unit of magnetic flux density.[3] One gauss equals 1×10−4 tesla (100 μT), so 1 tesla = 10,000 gauss.




I would say the best way to rate a railgun is by its Gs output.






share|improve this answer





















  • Durr. But then as mentioned, what's a good range of "realistic" numbers a future society would have on their power output? I mean, if you know. I'm about to go do some googling
    – armorhide406
    1 hour ago



















1














[ammunition diameter] by [exit velocity]



Essentially, you notate the diameter of the weapon's accommodation, and then notate how fast it can get a slug of that size going. That latter would probably be a range of velocities, given that different lengths of slug will take different energy inputs to accelerate.



Also consider if you want to be able to shoot to wound instead of shooting to kill. Chemical propulsion doesn't allow for that, but a railpistol might.






share|improve this answer





























    0














    Ammunition diameter x ammunition length x launch velocity, perhaps also including the energy content for those who don't want to work it out for themselves, e.g.:



    5x50mm 5km/s 31.25 kJ



    I leave it up to the reader to guess what the slug is made from.



    Obviously this could be a man-portable railgun.






    share|improve this answer





















      Your Answer





      StackExchange.ifUsing("editor", function () {
      return StackExchange.using("mathjaxEditing", function () {
      StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
      StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
      });
      });
      }, "mathjax-editing");

      StackExchange.ready(function() {
      var channelOptions = {
      tags: "".split(" "),
      id: "579"
      };
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function() {
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled) {
      StackExchange.using("snippets", function() {
      createEditor();
      });
      }
      else {
      createEditor();
      }
      });

      function createEditor() {
      StackExchange.prepareEditor({
      heartbeatType: 'answer',
      autoActivateHeartbeat: false,
      convertImagesToLinks: false,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: null,
      bindNavPrevention: true,
      postfix: "",
      imageUploader: {
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      },
      noCode: true, onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      });


      }
      });














      draft saved

      draft discarded


















      StackExchange.ready(
      function () {
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fworldbuilding.stackexchange.com%2fquestions%2f135150%2fwhats-a-good-way-to-classify-railguns%23new-answer', 'question_page');
      }
      );

      Post as a guest















      Required, but never shown

























      3 Answers
      3






      active

      oldest

      votes








      3 Answers
      3






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes









      2














      Gauss




      The gauss, abbreviated as G or Gs, is the cgs unit of measurement of magnetic flux density (or "magnetic induction") (B). It is named after German mathematician and physicist Carl Friedrich Gauss.1[2] One gauss is defined as one maxwell per square centimeter. The cgs system has been superseded by the International System of Units (SI), which uses the tesla (symbol T) as the unit of magnetic flux density.[3] One gauss equals 1×10−4 tesla (100 μT), so 1 tesla = 10,000 gauss.




      I would say the best way to rate a railgun is by its Gs output.






      share|improve this answer





















      • Durr. But then as mentioned, what's a good range of "realistic" numbers a future society would have on their power output? I mean, if you know. I'm about to go do some googling
        – armorhide406
        1 hour ago
















      2














      Gauss




      The gauss, abbreviated as G or Gs, is the cgs unit of measurement of magnetic flux density (or "magnetic induction") (B). It is named after German mathematician and physicist Carl Friedrich Gauss.1[2] One gauss is defined as one maxwell per square centimeter. The cgs system has been superseded by the International System of Units (SI), which uses the tesla (symbol T) as the unit of magnetic flux density.[3] One gauss equals 1×10−4 tesla (100 μT), so 1 tesla = 10,000 gauss.




      I would say the best way to rate a railgun is by its Gs output.






      share|improve this answer





















      • Durr. But then as mentioned, what's a good range of "realistic" numbers a future society would have on their power output? I mean, if you know. I'm about to go do some googling
        – armorhide406
        1 hour ago














      2












      2








      2






      Gauss




      The gauss, abbreviated as G or Gs, is the cgs unit of measurement of magnetic flux density (or "magnetic induction") (B). It is named after German mathematician and physicist Carl Friedrich Gauss.1[2] One gauss is defined as one maxwell per square centimeter. The cgs system has been superseded by the International System of Units (SI), which uses the tesla (symbol T) as the unit of magnetic flux density.[3] One gauss equals 1×10−4 tesla (100 μT), so 1 tesla = 10,000 gauss.




      I would say the best way to rate a railgun is by its Gs output.






      share|improve this answer












      Gauss




      The gauss, abbreviated as G or Gs, is the cgs unit of measurement of magnetic flux density (or "magnetic induction") (B). It is named after German mathematician and physicist Carl Friedrich Gauss.1[2] One gauss is defined as one maxwell per square centimeter. The cgs system has been superseded by the International System of Units (SI), which uses the tesla (symbol T) as the unit of magnetic flux density.[3] One gauss equals 1×10−4 tesla (100 μT), so 1 tesla = 10,000 gauss.




      I would say the best way to rate a railgun is by its Gs output.







      share|improve this answer












      share|improve this answer



      share|improve this answer










      answered 1 hour ago









      Xavon_Wrentaile

      3,373821




      3,373821












      • Durr. But then as mentioned, what's a good range of "realistic" numbers a future society would have on their power output? I mean, if you know. I'm about to go do some googling
        – armorhide406
        1 hour ago


















      • Durr. But then as mentioned, what's a good range of "realistic" numbers a future society would have on their power output? I mean, if you know. I'm about to go do some googling
        – armorhide406
        1 hour ago
















      Durr. But then as mentioned, what's a good range of "realistic" numbers a future society would have on their power output? I mean, if you know. I'm about to go do some googling
      – armorhide406
      1 hour ago




      Durr. But then as mentioned, what's a good range of "realistic" numbers a future society would have on their power output? I mean, if you know. I'm about to go do some googling
      – armorhide406
      1 hour ago











      1














      [ammunition diameter] by [exit velocity]



      Essentially, you notate the diameter of the weapon's accommodation, and then notate how fast it can get a slug of that size going. That latter would probably be a range of velocities, given that different lengths of slug will take different energy inputs to accelerate.



      Also consider if you want to be able to shoot to wound instead of shooting to kill. Chemical propulsion doesn't allow for that, but a railpistol might.






      share|improve this answer


























        1














        [ammunition diameter] by [exit velocity]



        Essentially, you notate the diameter of the weapon's accommodation, and then notate how fast it can get a slug of that size going. That latter would probably be a range of velocities, given that different lengths of slug will take different energy inputs to accelerate.



        Also consider if you want to be able to shoot to wound instead of shooting to kill. Chemical propulsion doesn't allow for that, but a railpistol might.






        share|improve this answer
























          1












          1








          1






          [ammunition diameter] by [exit velocity]



          Essentially, you notate the diameter of the weapon's accommodation, and then notate how fast it can get a slug of that size going. That latter would probably be a range of velocities, given that different lengths of slug will take different energy inputs to accelerate.



          Also consider if you want to be able to shoot to wound instead of shooting to kill. Chemical propulsion doesn't allow for that, but a railpistol might.






          share|improve this answer












          [ammunition diameter] by [exit velocity]



          Essentially, you notate the diameter of the weapon's accommodation, and then notate how fast it can get a slug of that size going. That latter would probably be a range of velocities, given that different lengths of slug will take different energy inputs to accelerate.



          Also consider if you want to be able to shoot to wound instead of shooting to kill. Chemical propulsion doesn't allow for that, but a railpistol might.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered 53 mins ago









          G. B. Robinson

          1717




          1717























              0














              Ammunition diameter x ammunition length x launch velocity, perhaps also including the energy content for those who don't want to work it out for themselves, e.g.:



              5x50mm 5km/s 31.25 kJ



              I leave it up to the reader to guess what the slug is made from.



              Obviously this could be a man-portable railgun.






              share|improve this answer


























                0














                Ammunition diameter x ammunition length x launch velocity, perhaps also including the energy content for those who don't want to work it out for themselves, e.g.:



                5x50mm 5km/s 31.25 kJ



                I leave it up to the reader to guess what the slug is made from.



                Obviously this could be a man-portable railgun.






                share|improve this answer
























                  0












                  0








                  0






                  Ammunition diameter x ammunition length x launch velocity, perhaps also including the energy content for those who don't want to work it out for themselves, e.g.:



                  5x50mm 5km/s 31.25 kJ



                  I leave it up to the reader to guess what the slug is made from.



                  Obviously this could be a man-portable railgun.






                  share|improve this answer












                  Ammunition diameter x ammunition length x launch velocity, perhaps also including the energy content for those who don't want to work it out for themselves, e.g.:



                  5x50mm 5km/s 31.25 kJ



                  I leave it up to the reader to guess what the slug is made from.



                  Obviously this could be a man-portable railgun.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered 20 mins ago









                  Monty Wild

                  23.6k360145




                  23.6k360145






























                      draft saved

                      draft discarded




















































                      Thanks for contributing an answer to Worldbuilding Stack Exchange!


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid



                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.


                      Use MathJax to format equations. MathJax reference.


                      To learn more, see our tips on writing great answers.





                      Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


                      Please pay close attention to the following guidance:


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid



                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.


                      To learn more, see our tips on writing great answers.




                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function () {
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fworldbuilding.stackexchange.com%2fquestions%2f135150%2fwhats-a-good-way-to-classify-railguns%23new-answer', 'question_page');
                      }
                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      Popular posts from this blog

                      サソリ

                      広島県道265号伴広島線

                      Accessing regular linux commands in Huawei's Dopra Linux